LED Sequential tail lights - Chevy Impala SS Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 20 (permalink) Old 10-11-2012, 05:12 AM Thread Starter
Junior Member
 
Join Date: Dec 2007
Posts: 4
 
Talking LED Sequential tail lights

Does any one know anyone who makes LED panel sequential tail lights? Im not talking about the cheap local parts store LED bulbs ,what im refering to is a panel of LED's, i found a web site that will be interested in designing and developing these, with one ocasion as they would like to see about 20 requests for these lights so they can be developed by them. I just purchased some of their lights for a 70 firebird, they are awesome and super bright Check out their web site for videos http://www.digi-tails.com
l7impala is offline  
Sponsored Links
Advertisement
 
post #2 of 20 (permalink) Old 10-11-2012, 09:08 AM
Senior Member
 
93capriceltz's Avatar
 
Join Date: Aug 2011
Location: Buford, GA
Posts: 449
 
Garage
Quote:
Originally Posted by l7impala View Post
Does any one know anyone who makes LED panel sequential tail lights? Im not talking about the cheap local parts store LED bulbs ,what im refering to is a panel of LED's, i found a web site that will be interested in designing and developing these, with one ocasion as they would like to see about 20 requests for these lights so they can be developed by them. I just purchased some of their lights for a 70 firebird, they are awesome and super bright Check out their web site for videos http://www.digi-tails.com
I've seen these LED Panel Tails on a Grand National and they look good. The price of LED's is coming down and the amount of products available is going up. I think that if they were to produce a LED Panel kit for the 91-96 Caprice / Impala Tails, and price it right, it would be a huge seller for them, even if they were not sequential. If they do not do it, someone else will.


1993 Caprice LTZ / LS:
51,000 miles, L05, 3:08 Posi, Harris Prom, Lowering Springs, Bilsteins,
96 Steering Wheel, 9C1 Hoses, Dual Snorkel Intake,
SS Rear Disks, J55 Fronts, High Flow Cats, Dual Exhuast, Fleetwood Horns and Center Console, Roadmaster Rear Door Lights, LED Interior
1992 Caprice Wagon: Black Sapphire/Silver, L05, Tow Pack, 3:23 Posi, 9C1 Cluster, 96 Steering Wheel, Fleetwood Horns, LED Interior
1996 9C1 - Former Whelen Trade Show Car - SOLD
1994 SS - SOLD
1991 9C1 - SOLD
93capriceltz is offline  
post #3 of 20 (permalink) Old 10-11-2012, 01:52 PM
Senior Member
 
WwWdotanthony92's Avatar
 
Join Date: Nov 2007
Location: Clearwater, FL by way of Hville, AL
Posts: 831
 
Are u wanting sequentials like on the main page of that link? Or three led boards and using a sequential kit like everyone else is running?


'92 Caprice Classic
WwWdotanthony92 is offline  
post #4 of 20 (permalink) Old 10-11-2012, 04:11 PM Thread Starter
Junior Member
 
Join Date: Dec 2007
Posts: 4
 
Three led panels would be fine with me I'd they are available anywhere. Sequential is just a preference, I currently have the filament type bulbs with sequential kit installed and I would really like Led's...
l7impala is offline  
post #5 of 20 (permalink) Old 10-11-2012, 08:50 PM
Senior Member
 
WwWdotanthony92's Avatar
 
Join Date: Nov 2007
Location: Clearwater, FL by way of Hville, AL
Posts: 831
 
Ill see if I can find my old prototype boards and take some pics. There is another forum member lilronjohnson? that advertized he does led tails also. Should be able to see pics in his vendor thread in the vendor section.


'92 Caprice Classic
WwWdotanthony92 is offline  
post #6 of 20 (permalink) Old 10-11-2012, 08:57 PM
Senior Member
 
uwsacf's Avatar
 
Join Date: Jun 2001
Location: Orlando, Florida
Posts: 3,524
 
I'm still good



I think this was the hardest mod I ever did - took over 100 hours - and I'll never do it again...

not sequential - but....

JaySS made some that did tricks back in the day - but all that's lost on the old forum..

Still have the LEDSS he made though for the chmsl


"I prefer the tumult of liberty to the quiet of servitude."
Thomas Jefferson to James Madison, 1787

2002/3/4/5 Award Winner - Lake Mirror Classic

Web page: http://www.cardomain.com/id/uwsacf

2009 BBB Lincoln Town Car
2007 BBB MSRT8 - The Phantom
2003 BBB Crown Vic Sport
1996 BBB Impala SS - The Shadow
1972 Chrysler Newport
uwsacf is offline  
post #7 of 20 (permalink) Old 10-12-2012, 07:47 AM
Senior Member
 
SScottie's Avatar
 
Join Date: Aug 2006
Location: Henderson, Ky
Posts: 1,416
 
Quote:
Originally Posted by l7impala View Post
Does any one know anyone who makes LED panel sequential tail lights? Im not talking about the cheap local parts store LED bulbs ,what im refering to is a panel of LED's, i found a web site that will be interested in designing and developing these, with one ocasion as they would like to see about 20 requests for these lights so they can be developed by them. I just purchased some of their lights for a 70 firebird, they are awesome and super bright Check out their web site for videos http://www.digi-tails.com
I might be interested, but that depends on the price.

95 DGGM
My Facebook
From Kentucky? Check in here>>>Kentucky B-Body List
SScottie is offline  
post #8 of 20 (permalink) Old 10-12-2012, 11:28 PM
Senior Member
 
chi-town 9c1's Avatar
 
Join Date: Jul 2005
Location: chicago
Posts: 385
 
Quote:
Originally Posted by SScottie View Post
I might be interested, but that depends on the price.
same here what they talkin?


There's a reluctance to confront reality and a desire to soften unpleasant realities
chi-town 9c1 is offline  
post #9 of 20 (permalink) Old 10-13-2012, 12:20 AM
Senior Member
 
95ssman's Avatar
 
Join Date: Dec 2009
Posts: 285
 
i started to build a set out of scrap tail lights need to finish mocking them up. then ill post some pics. i ordered the 3 strip leds and was going to try a couple of different ways to see which one looks and performs best for a low cost build.i planned on getting back on it after impala fest 2012.

HOUSTON INC. o.g. 95 ss - sold. 96 ss. - under construction.
95ssman is offline  
post #10 of 20 (permalink) Old 10-13-2012, 10:39 AM
Senior Member
 
SScottie's Avatar
 
Join Date: Aug 2006
Location: Henderson, Ky
Posts: 1,416
 
Most of the prices I saw on the website was around $250 or so.

95 DGGM
My Facebook
From Kentucky? Check in here>>>Kentucky B-Body List
SScottie is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Chevy Impala SS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome