Set of 15" Cragar S/S Wheels with Tires. - Chevy Impala SS Forum
 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 12-29-2012, 04:31 PM Thread Starter
Senior Member
 
punkroqgearhead88's Avatar
 
Join Date: Oct 2008
Location: The State of Jefferson.
Posts: 365
 
Set of 15" Cragar S/S Wheels with Tires.

Sorry, no shipping on these...

Just removed these set of Cragars from my daily driven S10. Went with a different set of wheels and tires. These will fit three different bolt patterns. 5" on 4"-1/2", 5" on 4"-3/4" and 5" on 5", in other words will fit most Ford, MOPAR and GM patterns. The front rims are 15"x7" with a 4"-1/4" backspacing, one of them has some chrome flaking which is typical with Cragars. The front tires are 225/60/15 Fuzion HRI's with 6/32 of tread in the center and a DOT date of 2007. The rear rims are 15"x8" with 4"-1"/2" of backspacing and the tires are like new 255/60/15 Cooper Cobras with 10/32 of tread in the center and a DOT date of 2011.... These are not old, dry rotted tires which most people try to pass off as "new" just because they have "a lot of tread still", beware!

I'm also including the specical "offset" or "oblong" washers that you are supposed to use with Uni-Lug pattern wheels and a set of shank style, 12mm x 1.50 thread pitch lug nuts... Just those alone are well over $50.

$500 OBO.

Keep in mind, just one bare wheel costs over $160 new:
http://www.summitracing.com/parts/crr-61815/overview/
Attached Thumbnails
Click image for larger version

Name:	100_1515.jpg
Views:	209
Size:	208.9 KB
ID:	27104   Click image for larger version

Name:	100_1513.jpg
Views:	151
Size:	204.0 KB
ID:	27105   Click image for larger version

Name:	100_1521.jpg
Views:	158
Size:	206.3 KB
ID:	27106   Click image for larger version

Name:	100_1520.jpg
Views:	179
Size:	206.3 KB
ID:	27107   Click image for larger version

Name:	100_1517.jpg
Views:	148
Size:	194.6 KB
ID:	27108  


If you're hung like a horse,you don't need a Mustang.

Mods:58mm Throttle body,Ported intake manifold,Ford SVO 30 LB. injectors,Scorpion 1.6 SA Roller Rockers,Ported 643 casting F-Body aluminum heads,F-Body MAF,Victor Reinz .026" head gasket,LT4 knock module,LT4 Hot Cam,Summit electric water pump, MSD box & wires True Cold Air Intake,Underdrive Pulley,Edelbrock Shorty Headers, 2-1/2" Tailpipes,Cherry Bomb Muffs,9.5" 3000 Stall Converter
Tuned by Tad
punkroqgearhead88 is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 12-31-2012, 02:00 PM
Senior Member
 
sprocket's Avatar
 
Join Date: Jul 2007
Location: Delray Beach, FL
Posts: 3,693
 
finally the rims/tires I need for the old Merc Cougar in the garage at a good price and they are on the other side of the continent......GLWS

sprocket is offline  
post #3 of 8 (permalink) Old 12-31-2012, 02:54 PM
Senior Member
 
KW Baraka's Avatar
 
Join Date: Feb 2001
Location: South Central Texas....By Way of the South Side of Chicago!!!!!
Posts: 19,823
 
Quote:
Originally Posted by punkroqgearhead88 View Post
Sorry, no shipping on these......
Why not?

UPS will ship them as is......wnot special wrapping or boxes, etc required......

Just sayin......but shipping may help you sell them quicker.

GLWS.

KW

1996 BBB SS, 398ci Solid Roller LT4


1995 DCM SS, LS3 w/Custom CAI, V-max 90mm TB, TSP CNC Ported Heads, Lingenfelter GT1-1 cam, Headman Mid-length Headers, 2 1/2" cat-back, 3200 Circle-D TC, 3.42 gears (for now) -- 450 HP/400 TQ To The Wheels


2014 Chevy SS; 429ci LS3 -- 508HP, 455TQ @ the wheels....After Break-in Dyno & Track Results Pending

KW Baraka is offline  
post #4 of 8 (permalink) Old 12-31-2012, 02:57 PM
Senior Member
 
1slow96's Avatar
 
Join Date: Jun 2011
Location: Dayton , Ohio
Posts: 5,747
 
Garage
Set of 15" Cragar S/S Wheels with Tires.

For all those unwilling to ship their items. Why not just place an ad in your local paper?
1slow96 is offline  
post #5 of 8 (permalink) Old 01-01-2013, 10:13 PM
Senior Member
 
DeathmobileSS's Avatar
 
Join Date: Dec 2007
Location: Whittier, CA
Posts: 2,123
 
BUMP for a good guy and good seller....

Aaron that is a good deal. They will sell in a heartbeat. What happened to your S10? What are your driving everyday now?

Shawn
96 Impala SS- 355 Forged bottom end, LPE211 cam, Heads and Intake Ported By Tad, TunedByTad, Vigilante, VacModded 4l60 built by Remac, 3.73, CIA headers, Bolt On's
62 Suburban
DeathmobileSS is offline  
post #6 of 8 (permalink) Old 01-07-2013, 02:52 PM Thread Starter
Senior Member
 
punkroqgearhead88's Avatar
 
Join Date: Oct 2008
Location: The State of Jefferson.
Posts: 365
 
Quote:
Originally Posted by KW Baraka View Post
Why not?

UPS will ship them as is......wnot special wrapping or boxes, etc required......

Just sayin......but shipping may help you sell them quicker.

GLWS.

KW

I know that,but,most people don't want to pay what it would cost to ship these freight, and even if they did, I still have to label them, take them to a UPS store (which is difficult with my schedule) and then hope they don't get damaged since they aren't shrink wrapped or on a pallet. I rather avoid it.

If you're hung like a horse,you don't need a Mustang.

Mods:58mm Throttle body,Ported intake manifold,Ford SVO 30 LB. injectors,Scorpion 1.6 SA Roller Rockers,Ported 643 casting F-Body aluminum heads,F-Body MAF,Victor Reinz .026" head gasket,LT4 knock module,LT4 Hot Cam,Summit electric water pump, MSD box & wires True Cold Air Intake,Underdrive Pulley,Edelbrock Shorty Headers, 2-1/2" Tailpipes,Cherry Bomb Muffs,9.5" 3000 Stall Converter
Tuned by Tad
punkroqgearhead88 is offline  
post #7 of 8 (permalink) Old 01-07-2013, 02:55 PM Thread Starter
Senior Member
 
punkroqgearhead88's Avatar
 
Join Date: Oct 2008
Location: The State of Jefferson.
Posts: 365
 
Quote:
Originally Posted by 1slow96 View Post
For all those unwilling to ship their items. Why not just place an ad in your local paper?
Because there are a lot of forum members that live in Southern California. Also we're aren't talking a piece of trim or a small mechanical part that can easily be boxed up and sent regular mail.

If you're hung like a horse,you don't need a Mustang.

Mods:58mm Throttle body,Ported intake manifold,Ford SVO 30 LB. injectors,Scorpion 1.6 SA Roller Rockers,Ported 643 casting F-Body aluminum heads,F-Body MAF,Victor Reinz .026" head gasket,LT4 knock module,LT4 Hot Cam,Summit electric water pump, MSD box & wires True Cold Air Intake,Underdrive Pulley,Edelbrock Shorty Headers, 2-1/2" Tailpipes,Cherry Bomb Muffs,9.5" 3000 Stall Converter
Tuned by Tad
punkroqgearhead88 is offline  
post #8 of 8 (permalink) Old 01-07-2013, 02:58 PM Thread Starter
Senior Member
 
punkroqgearhead88's Avatar
 
Join Date: Oct 2008
Location: The State of Jefferson.
Posts: 365
 
Quote:
Originally Posted by DeathmobileSS View Post
BUMP for a good guy and good seller....

Aaron that is a good deal. They will sell in a heartbeat. What happened to your S10? What are your driving everyday now?
Thanks a lot Shawn!

I thought the same thing but maybe everybody is still recovering from their holiday expenses... I still have the S10, I took these wheels and tires off of it because I went with a set of (lighter) polished TT2's... SO I have no use for these now...

If you're hung like a horse,you don't need a Mustang.

Mods:58mm Throttle body,Ported intake manifold,Ford SVO 30 LB. injectors,Scorpion 1.6 SA Roller Rockers,Ported 643 casting F-Body aluminum heads,F-Body MAF,Victor Reinz .026" head gasket,LT4 knock module,LT4 Hot Cam,Summit electric water pump, MSD box & wires True Cold Air Intake,Underdrive Pulley,Edelbrock Shorty Headers, 2-1/2" Tailpipes,Cherry Bomb Muffs,9.5" 3000 Stall Converter
Tuned by Tad
punkroqgearhead88 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Chevy Impala SS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome