My fan selector switch only works on high. I replaced it and nothing changed. Do you guys think it could be the blower motor? If not what could it be?

thanks

It could be the fan control module beside the fan. There are 2 kinds. the wire coil for the manual, and the electronic for the automatic. The wire coil has one connector, and the electronic has two connectors. The wire coil style is cheap, and you would be better off getting a new one from the local parts store. The electronic one is very expensive and can sometimes be found on ebay for about $140. A used electronic one from the JY is about $15-20, or if you can find a used one on the forum they are about $30 + shipping.

They are easy to R&R. There are 3 screws, and the connectors. To access the part, you have to remove the knee panel under the glovebox. You do have to pretty much stand on your head to get under the dash.

thanks i ordered the resistor. i will take it from there