so im sure you guys have seen my other posts on my changing the interior in my car ,,, from blue to red. well all of this stuff stemmed from believe it or not me just wanting to delete my side molding ... lol so now im cutting holes in the floor repainting all of the interior plastic, bonnie swap, and a monte carlo steerig wheel swap... oh and ST urethane smoothies n trunk lock relocation!!! well i guess my original "red leather interior post" turned into somewhat of a complete build... so ill start posting all of my pics into this thread ,,,thanks

hee ya go

heres an idea of how the car looked before i started ripping it apart

im in the process of trying to mount my front smoothie bumper,,, im at a stalemate and very intimidated to say the least . i drilled and bolted the center top portion up , but the fender mounts are scaring the sh!!!!!t out of me i know if i dont get it rite its a wash howd you guys go about ligning this up and marking n drilling them out??? any pointers appreciated greatly!!!!!!

Looking good can't wiat to see how this turns out.

thanks i finally jumped in and drilled the fender mounting holes into the front bumper everything went pretty good ,,, now i haVE TO figure out how to get the lower splash guard back in and how im going to layout and drill out for those holes. im really contemplating jusr remounting the splash guard with the three larger bolts under the wheel well and drilling new holes through both the smoothie n splash guard

heres some pics of the front smoothie installed... remember ive NEVER ATTEMPTED anything like this before...

passenger side of the smoothie isnt really up to par from the mold

sorry for tge cell pics

Did you have any isssues removing the front wheel well moldings? I love the smoothie bumpers, can't wait to get a set for my 96, they look awesome.

no issues at all with the wheel well moldings they were the easiest part ive taken off the car so far lol

no issues at all with the wheel well moldings they were the easiest part ive taken off the car so far lol

ok that's good to hear, haven't touched those yet on mine (scared there is unwanted rust hidden under there)

Im swapping 2 font stock bumpers next weekend. Good thing i have the FSM :)

Looks Good.

i did a search and couldnt really find exactly what i was looking for... i pulled off the rear wheel well moldings last night and im wondering what the best way to fill in the groove is... ive read somewhere on here u guys use kitty hair??? i know i obviously can be welded in but thats pretty $$$$ whats your recommendations ??? thanks

http://www.impalassforum.com/vBulletin/showthread.php?t=231980&highlight=rear+trim (http://www.impalassforum.com/vBulletin/showthread.php?t=231364&highlight=metal+filler)

thanks man

thanks anthony very helpful appreciate it

trying to do something different ,, what do yous think???

looks good, not too different a lot of people put the leaping dear emblem there instead of the retro one, but i actually like that one as well

yea ive seen them i was gonna get the plain crossed flags but alot of guys have them too... thanks

so what have you guys done with the drain holes after you ripped out the rubber from the pig cars????? lol just patch n weld up???

any suggestions on what you guys have done to fill these holes in the floors???

so i drove from philly to disney two weeks ago... spent a week down there and came home to my garage still dumfounded on what to do with the drain holes in the floor pans,,, im back home and still out of work ready to tackle these holes,,, any suggestions guys???

should i just weld a plug in???

some people would replace it with another INC floor. some would just cut a square and trace up a new plate, weld it up. i also seen people use JB weld and smack a new plate right on!