Chevy Impala SS Forum banner

SS Caprice Parts for Sale clearing out storage

6K views 54 replies 17 participants last post by  lt1ssb 
#1 · (Edited)
rear frame brace off RM

PM me PLEASE as to not have this thread 40 pages long I check them daily dont be afraid to make me offers I am willing to seperate alot of stuff if you dont need everything

If you need better or more pics of something let me know, need something I dont have listed I can probably get it for you pm or text me at 561-573-0128


PICS BELOW



EVERYTHING OBO
all Items include shipping but no pp fees unless posted otherwise
Some items local pick up only
will give you a discount on anything you pick up in west palm


New Items
2 power antenna 75 shipped
2 trunk light harnesses 1 with lens one clip in style 25 and 20 shipped
driver fan motor 35 shipped
trunk switch 6 shipped
3 sets of ac knobs 15 each nice shape
tan seatbelts good shape 5 each + ship
grey seat belt anchor covers
trunk spare hold down nuts
4 black door sills
opti spark harness great condition SOLD
high beam switch
foam jack cover
oil dipstick lt1
fbody MAF sensor only I am keeping the end caps 45
fan harness not burn great shape 25
working opti GM unit removed 2/18/2013 45k 75
factory exhaust manifolds 100


push rods 7.2 35 set 67k


1 SS wheel ok shape some clear pealing 50 pick up
1 Ss wheel with tire clear peeling real bad 40 pick up


Rear axles 50 for the pair 67k



Items I Will Ship
96 SS shifter Knob 40
2 rear window switches ss 15 each
Power window lock out switch 7
rear map lights SEM med grey 25
dome light bulb holder 15 SOLD
dimmer switch 15
AC light harness 10
ashtray light harness 10
ashtray metal bracket 5+ship

Front bumper impact strip Black off SS 10 +ship
bottom door black ss molding driver 50
bottom door black ss molding rear pass 40
bottom molding black ss molding behind doors 20 each
bottom molding black ss molding front fenders 10 each
2 black ss rear pass fender trim 75 plus ship each
black ss driver front fender trim 40+ship
96 SS floor shift bracket 45 shipped
BBK 52mm TB gasket kit 10
SEM black dome light 15
Upper black SEM vents 12
SS coat lights and hooks 20
AIR pump filter 10
4 Spare tire hold down nuts 4
Blue lower seatbelt bolt cover 2
red upper setbelt bolt cover 2
6 SS quarter panel leaping deers 14 pair
4 AC knobs 12 set
ARP torque converter bolts SOLD
hood light and lens 13
hood light lens only 6
2 caprice classic dash emblem 10
capcrice hood emblem 7
4 coin holder 8
2 MAP sensor 20
5 IAT sensor 20
3 TPS 15
AC vents dash center 6 each
Complete AC vent 12 each
Power antenna nut and spacer 5
2 trunk light with lens ss style 25
3 trunk light wo lense 20
3 LT1 knock modules 10
2 compass Mirrors 25 each 1 left
1 96 ss mirror 45
95 style coil 20
upper green SEO hose 20
Power Seat switch 20
1 center caps no emblem 17
2 rear clear style door lights gray roadmaster 20
rear block off plates for door light 10 SEM black
pass rear arm rest 25
pass front arm rest SEM med gray clip broken holes good 30
pass front arm rest SS gray clip broken holes good
rear 8.5 diff cover chrome with bolts 25
driver inner door handle 25
door lock motor 15
gray caprice headrest covers 20
 
See less See more
#2 ·
Put a hitch on my SS this weekend to tow my skis, any interest in a rust free bar
this is the bar that runs from rear frame rail that i believe was only offered on the Roadmaster
I guess 25 plus shipping?
Do you have any pics of this thing,ive been checking every damn roady at the bone yard and have came up empty..

Im assuming this was only offered on certain roadys?? didnt find one on the 6 freakin RM at the bone yard.
 
#6 ·
Will post pics tonight
If anyone else wants one i can get one more i know where a second one in good condition is as well

As for the boneyard, I always look have found 5 total
Have 2 on both my 96 SS. Selling the one off the 95 dd SS
 
#3 ·
rear frame brace off RM

For those unable to find the "buick-brace". Mike Harris (1FAST94) made one for me out of chrome-moly steel,and perhaps would make more if you ask.
 
#4 ·
I picked mine up at a JY years ago. But here is a good thread with more info on the bar. Can't say as if it does anything or not, but can't hurt. There are a few companies that make them too but a little more than what the op is selling his for.

http://www.impalassforum.com/vBulletin/showthread.php?t=266530
 
#7 ·
Its a few roady's at the junkyard. Im going in the morning to look for parts including a buick brace. If they dont have one, i may be interested in one pending tonights pics and shipping to 30213? Thanks.
 
#8 · (Edited)















 
#10 · (Edited)
ok lmk i can cut ya a deal on that and the rear cover if u still want that
 
#11 ·
will do sir
 
#15 ·
Sold, pm if any one wants one more as I can get one more tomorrow
 
#16 ·
I'll buy it.
 
#17 ·
Both sold. If I come across anymore will post they are approx 12-20 to ship
Via parcel post
 
#18 ·
payment sent.

lowrizza
 
#20 ·
Here is mine I picked up last year at a Junkyard.........sand blasted it and painted it red to match my black and red color scheme I have going on. They dont do anything for the car but I figure what the heck!!

 
#28 ·
That looks good. Thanks for sharing the photo. I'll follow suit and paint mine black to match the sway bar, when i get it. Lot's of projects to do this winter.
 
#22 · (Edited)
The frame brace is "rare" because it was not a production part--there was a TSB (Technical Service Bulletin) that was created to deal with a specific problem--can't even recall what it was, maybe drone or vibration--and the brace a service item "fix" that was only dealer-installed if/when a customer brought the car in with a complaint that could be addressed by the TSB. The original GM service part is no longer available new--since it was not "production" the part was not even listed in the parts book--only in the bulletin.

Although the TSB was for RM sedans only, many Chevy owners installed the brace, seeing it as a possible fix for similar issues they were experiencing.

There is a replacement available, in stainless steel, from a supplier north of Atlanta:

1991-1996 General Motors "B BODY" REAR FRAME BRACE


Polished Stainless Steel with Bolts & Nuts

SS-0054 $55.00

The part may also be available through RMS Auto Parts
 
#27 ·
There is a replacement available, in stainless steel, from a supplier north of Atlanta:

1991-1996 General Motors "B BODY" REAR FRAME BRACE


Polished Stainless Steel with Bolts & Nuts

SS-0054 $55.00

The part may also be available through RMS Auto Parts
I've bought some of the items directly from MMS and they do offer their items on RMS as well. They have some nice dress up items for our cars. The owner seemed very helpful when I dealt with them and I love to help small USA Businesses when I can.

I already had the GM brace but their brace is a nice, albeit, little more expensive option if you can't find a used unit.
 
#23 ·
#24 ·
Spoiler sold
1 Rim sold
hood light assembly with lens sold
 
#29 ·
One is perfect
One has 1 clip missing
2 have 2 clips missing
 
#31 ·
i will do 21 for center caps shipped i will post a pic in a min of the backs of them


1 hood light assembly sold
2 wheels have been sold as well locally
have 3 left and I may part with one more
 
#33 ·
i will do 21 for center caps shipped i will post a pic in a min of the backs of them
good deal. thanks. as long as the caps still hold in place on the SS rims then I'll take them.
 
#32 ·
Use Stainless Steel Hardware when you install these...cause in the midwest (no matter if your car is a garage queen in the winter) these things can be a pain later on to remove. If I recall they use M8-1.25x 30 mm Flange bolts (always come in black oxide) which rust but I ended up spraying them black and then clear coat them to prevent corrosion, and used stainless steel flange nuts to match
 
You have insufficient privileges to reply here.
Top