Chevy Impala SS Forum banner

how to remove the fender?

14K views 5 replies 5 participants last post by  383LSxIMPALA 
#1 ·
i seen alot of bolt around there. the hood, the wheel well, the radiator support bolt, inside the door area, etc. etc.

i want to delete the antenna. i did a search and nothing came up. anybody?
 
#5 ·
You can remove the antenna without removing the entire fender. You can then weld a patch over the hole and clean it up. To remove the antenna, loosen the bolts that hold the wheelhouse to the fender, and body (behind the tire), block the wheelhouse away from the fender and remove the 10 mm bolt in the doorjam. The bezel, electrical connector and the antenna lead, are next and you can pull it out of the bottom. You can avoid all the hassle of realigning the fender.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top