Chevy Impala SS Forum banner

window motor question

830 views 2 replies 2 participants last post by  Nor-CalSS 
#1 ·
Is there some type of internal load protector on our 94/96 imp window motors?

i was rolling down my driver window this morning on the way to work. It struggled due to the ice/frost on the window then it just stopped. Wouldnt go up or down and drove the rest of the way to work with it half way up.

It was getting power so that wasnt the issus. At work I took the door panel off and then unplugged the power wires at the motor. As soon as i re connected the power the window started to work fine. Rolled up and down with no issues at all.

So im just curious if there is indeed a load protector on the motors or is it just coincidence and I should look into picking up another window motor?
 
#3 ·
Thanks for the reply Allan. After about 2 hours it still didnt work. It only worked after I unplugged it then plugged it back in.

Thanks for the info. Its good to know .
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top