WTB 96 fleet ECU

[Bigbusa]

Need a 96 fleet computer mine is not reading at the obd port and there is power coming to the port...Thanks in advance

[CoupeDTS]

Originally Posted by Bigbusa

Need a 96 fleet computer mine is not reading at the obd port and there is power coming to the port...Thanks in advance

you sure the right wire has 12volts? Mine did the same thing, I had to run a seperate 12v to it.

[Bigbusa]

The scanner is powering on but says it could not communicate with ecu,from what I looked up thats a computer problem..

Originally Posted by CoupeDTS

you sure the right wire has 12volts? Mine did the same thing, I had to run a seperate 12v to it.

[95BRMW]

Try to get the codes through the climate control. Hold the temp up and off button for a few seconds until the display display 00 then hit the out temp button to display the codes if there are any.

[CoupeDTS]

Originally Posted by 95BRMW

Try to get the codes through the climate control. Hold the temp up and off button for a few seconds until the display display 00 then hit the out temp button to display the codes if there are any.

that doesnt display all the codes on a 96 because its a obd2 and that setup is for a obd1.

try car-part.com to search junkyards.

[Bigbusa]

I did that and I only gota few codes but it needs a tune and it seems the old computer wont take one....I also want to checj my oil pressure and the obd with the climate does not show that...Does anyone know the part # on a 96 fleet ecu

Originally Posted by CoupeDTS

that doesnt display all the codes on a 96 because its a obd2 and that setup is for a obd1.

try car-part.com to search junkyards.