| ||||
| ||||
|
New User? Register - Forgot Password | ||||||
| Register | Garage | Photo Gallery | FAQ | Members List | vBClassified | Googlemap ME | Calendar | Search | Today's Posts | Mark Forums Read | Auto Escrow | Auto Loans | Insurance |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
04-04-2012, 08:32 AM
|
|||
|
|||
96 caprice OBDI conversion
My neighbor wants me to tune his 96 caprice. I only have OBD1 software. After I convert an OBD1 pcm with the resistors for the knock sensors I planned to flash a 95 caprice tune as a base file to start with. I know that the transmissions are different between 95 and 96. Will the 95 tune operate the 96 transmission correctly?
__________________
1996 DCM Impala SS 1994 DCM 9C1 Caprice 1981 LQ9 4L80E Trans Am 
|
|
#3
04-12-2012, 11:40 AM
|
||||
|
||||
|
Yes, it will shift correctly. The transmissions are the same.
Also, you don't have to solder in resistors to the PCM, just replace the knock sensors on each side of the motor w/ ones from a 95. -Nab
__________________
BattleMASTER: 302LT1 turbo still in the works Black Bat: 2012 Potomac Speedway Strictly Stock Champion Blue Wail: 377LT1 12.35 @ 109 Ms. G's cars: ImpalaMASTER: half BUICK half CHEVY 383LT1 10.64 @ 122 SSparkle Cat: 383LT1 12:1 needs race gas
|
| Sponsored Links | |
Advertisement | |
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
