| ||||
| ||||
|
|||||||
| Register | FAQ | Donate | Members List | Calendar | vBClassified | Googlemap ME | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#1
11-03-2009, 03:10 PM
|
||||
|
||||
wiring up reading lamps, auto-dime mirror, sunvisors
I am no pro what so ever when it comes down to doing electrical, but I have a 96' 9c1 caprice and I am interested in adding the rear reading lamps, the light up sun visors as well as the auto-dim mirror that has map lights from out of a fully loaded b-body.
Is there a simple way of doing this? I have the roof mounted wiring that connects all 5 of these just not sure where I would splice it to?? I am not even sure if this is possible without some serious modification so I'd appreciate any info before I tackle this issue. ****Also has anyone done the mod where the stereo stays on for 10 minutes after the car is shut off??? thanks- 
|
|
#2
11-03-2009, 05:30 PM
|
||||
|
||||
|
The wiring harness comes up the B pillar on the driver side. If you have the connector on your new harness, it should just plug in at the base of the pillar.
__________________
1991 Olds CC 3.23 posi, dropped, Stainless full moons, 255/60/15 R, 215/70/15 F, Recaros, Personal 13.5 inch/MOMO 14 inch SW w/quick release. 1992 Olds CC stock. 85~86K Check my parts for sale Hand picked parts for the descriminating member. Buying non working Caprice/wagon pwr antennas w/good mast. Old mechanic's saying: If it does not work, hit it with a hammer...if it still does not work, use a bigger hammer...if it breaks, it needed replaced anyway.
|
|
#3
11-03-2009, 07:56 PM
|
||||
|
||||
|
Quote:
__________________
ANGELED-OUT 96' Caprice Classic
|
|
#4
11-03-2009, 07:58 PM
|
||||
|
||||
Do the RMW's have the harness there, too? I've been thinking of doing the same to the marshmallow...
__________________
Bill "The Verb" Crovo - Resident Car Slut  95 White WB4 "GS"-The Marshmallow- Forget everything you know, Something Wicked this way comes... 01 GMC 2500 ECSB SLT -The Slut- 6-OH!, four by, and loaded to the gills. So much for leaving it stock...  66 Caddy Calais -The Cadirat- 429/TH400. Baby Powder Blue with Swiss. Metallic blue cloth interior. Stay tuned. ISSCA #257 www.badassofne.net
|
|
#5
11-04-2009, 06:20 PM
|
|||
|
|||
|
Just curious where is this mystery connector that the roof harness plugs in to? And what does it look like? On my previous car I retrofitted in the coathook lights, auto-dim mirror, and the sunvisor lights. I just tapped into the wires that were already there as in 9C1's they have a constant hot wire for the police dome light(orange wire needed for sunvisor and coathook lights) and the switched overhead light wire(white for the coathook lights). I just needed to run the "green" wire for the reverse mirror cutout signal and a black wire for a solid ground(though if you still have the police overhead light you can use the ground for that). - Peter
__________________
Peter Cordes - pcordes1979@yahoo.com 1995 Caprice SS/9C1 Black w/ tan leather interior 1993 Ford Escort LX Mocha Frost Metallic w/ tan interior
|
|
#6
11-05-2009, 10:00 AM
|
|||
|
|||
|
The harness/wire is on the Driver's side B-pillar, in the vicinity of the seat belt retractor. Just unplug the wire that's already there and plug in the new one. It's best to trace the wire from the domelight down or you might miss it. There is a harness there you just have to keep tracing the wire. Mine (9C1) was so long, the excess wire was stuffed under the rubber mat, inside the plastic housing along the door sill.
|
|
#7
11-05-2009, 12:12 PM
|
||||
|
||||
|
Maybe this will help:
 If you can't find the harness, just ground the lamps to the dark blue/stripe one, that's how I did mine because the police force that had my car clipped the harness in several places. I was thinking the exact same thing about the mirror with the compass and ambient temps, I have the wiring schematic for that too if you like...
__________________
'95 9C1 LT1 
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
