| ||||
|
#441
|
||||
|
||||
|
Bump and Merry Christmas to everyone. We have our new low mileage short block all ready to assemble. We are putting it in this week. This will hold us over while we spend the time building the engine we want. I couldn't stand not having the car driveable. I get all depressed and chit.
We found out that our old engine failed because we lost the pickup tube. I guess our weld was not good. Has anyone been going to the drags the last couple of months? Work has been insane but I want to go hang out soon. Stu is driving now!
__________________
Shawn 96 Impala SS- Stock factory short block, LPE211 cam, Heads Ported By Tad, TunedByTad, Vigilante, VacModded 4l60, 3.73, CIA headers, Full Bolt On's 07 TBSS 62 Suburban
|
| Sponsored Links | ||
Advertisement | ||
|
#442
|
||||
|
||||
|
Shawn,
Happy Holidays to you as well! Haven't signed in here in almost 3 months! Know what you mean about getting depressed when your car has downtime,it's like part of you is missing... Too bad about your pick-up tube.... That's why I installed this while I had my oil pan off last year... ![]() Cheap insurance, and no welding or brazing required.... No problems yet! Wish I had time to go to the track...Especially with the last couple weeks being pretty cold.... I thought I'd have some 1.7 Rockers installed by now, but lifes gotten in the way and I've had to put the '95 and my other projects on hold till I move...
__________________
If you're hung like a horse,you don't need a Mustang. Mods: 58mm Throttle body, Ported intake manifold, Ford SVO 30 LB. injectors, Ported 643 casting F-Body aluminum heads, F-Body MAF, Victor Reinz .26" head gasket, LT4 knock module, LT4 Hot Cam, Summit electric water pump, MSD box & wires ,True Cold Air Intake, Underdrive Pulley, Edelbrock Shorty Headers, 2-1/2" Tailpipes, Cherry Bomb Muffs, 9.5" 3000 Stall Converter Tuned by Tad
|
|
#443
|
|||
|
|||
|
Happy Holidays everyone.
__________________
www.vipersoftheworld.com |
|
#444
|
||||
|
||||
|
trying to get some Shizzle done before we run out of 2012
![]() ![]() ![]() garage is 52F = slowed progress on 9c1 exhaust project raining outside = negative on the J5 test drive Saturday pre newyear = all the welding supply stores are closed and I'm out of Argon / Co2
__________________
NotoriouSS Tad <-- up to no good! 96' ImpalaSS - Johhny 5 - 7.9 @ 89.07 1.734 - waiting for the 9C1 to get out of the way 96' 9C1 - POS / DD / Beater - wiring nightmare in progress~! 67' El Camino - Rosie - 7.9 @ 86.5 1.77 60' on a street tire NA Click here to check out my EFI tuning Blog! |
|
#445
|
||||
|
||||
|
Ohhhhhhh buddy.......
It was a Crazy Christmas break for sure. We got a low mileage lt1 bottom end to put in DM. That is moving along although the rain we had made things move slowly. Stu gets his license next month and as we are putting the car back together I still am not sure if he will be driving it everyday. Cindi and I have been looking for a cheap beater Saturn or something for him. Oh and... Shawn gotz a new toy!!!! Hopefully I will get it tomorrow and I will post pictures. I worked out the deal yesterday and now am waiting for it to be prepped and delivered. I have been looking for this specific car for quite a while now and it will be my next fun fast car slash daily driver slash sunday family drive car- the way DM started out for us.
__________________
Shawn 96 Impala SS- Stock factory short block, LPE211 cam, Heads Ported By Tad, TunedByTad, Vigilante, VacModded 4l60, 3.73, CIA headers, Full Bolt On's 07 TBSS 62 Suburban
|
|
#446
|
||||
|
||||
|
We need to set some limits on the DM PCM
call it "anti 2point ticket" tuning ![]() ![]()
__________________
NotoriouSS Tad <-- up to no good! 96' ImpalaSS - Johhny 5 - 7.9 @ 89.07 1.734 - waiting for the 9C1 to get out of the way 96' 9C1 - POS / DD / Beater - wiring nightmare in progress~! 67' El Camino - Rosie - 7.9 @ 86.5 1.77 60' on a street tire NA Click here to check out my EFI tuning Blog! |
|
#447
|
||||
|
||||
|
So did you get your new toy yet Shawn?
I'm guessing CTS-V?
__________________
If you're hung like a horse,you don't need a Mustang. Mods: 58mm Throttle body, Ported intake manifold, Ford SVO 30 LB. injectors, Ported 643 casting F-Body aluminum heads, F-Body MAF, Victor Reinz .26" head gasket, LT4 knock module, LT4 Hot Cam, Summit electric water pump, MSD box & wires ,True Cold Air Intake, Underdrive Pulley, Edelbrock Shorty Headers, 2-1/2" Tailpipes, Cherry Bomb Muffs, 9.5" 3000 Stall Converter Tuned by Tad
|
|
#448
|
||||
|
||||
|
Sounds like you guys are starting off the year quite well
__________________
95 BBB 96 DGGM ISSCA#2212
|
|
#449
|
||||
|
||||
|
Haven't heard from anyone lately, how's everyone?
In case you guys didn't know, I just found out earlier today that the NMCA is going to be back in Pomona in two weekends again! I think I'm going to pay the big $$$ just to be able to run down Parker Ave. a few more times while I still have the chance... Who else is up for this? Shawn, Tad? Save at least $25 if you pre-register. http://www.nmcadigital.com/2013/04/26/10927/
__________________
If you're hung like a horse,you don't need a Mustang. Mods: 58mm Throttle body, Ported intake manifold, Ford SVO 30 LB. injectors, Ported 643 casting F-Body aluminum heads, F-Body MAF, Victor Reinz .26" head gasket, LT4 knock module, LT4 Hot Cam, Summit electric water pump, MSD box & wires ,True Cold Air Intake, Underdrive Pulley, Edelbrock Shorty Headers, 2-1/2" Tailpipes, Cherry Bomb Muffs, 9.5" 3000 Stall Converter Tuned by Tad
|
|
#450
|
||||
|
||||
|
I heard there were a lot of folks that got just 1 run. As nostalgic as it is, I don't know if id up for it
__________________
![]() 1995 Impala SS- She'll Make You Think Twice |
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|