Throw back ss

[ShowSS12]

where did you get the billet seat levers?

[mrbbody]

Originally Posted by 95DoubleBubble

Digging the wheel and console. I just thru in a 66 impala wheel in mine, damn that things is huge. Who sells this one?

thanks, the one i have is a billet specialties, i believe its a 14 inch. there is a company that reproduces some of the original styles in a 15 inch, when the original ones are 17 inch, but niether are cheep

Originally Posted by st95ss

very nice bruh, pics are hot

thanks bruh

@ showss12- they are 1/4 wing window cranks. i removed the knob at the end. fit right on

[95DoubleBubble]

Originally Posted by mrbbody

thanks, the one i have is a billet specialties, i believe its a 14 inch. there is a company that reproduces some of the original styles in a 15 inch, when the original ones are 17 inch, but niether are cheep




thanks bruh

@ showss12- they are 1/4 wing window cranks. i removed the knob at the end. fit right on

I can deal with the diameter but what kills me is the height from the base of the wheel to the top. it's close to 6 inches where my last Wheel was only 2

[JOHNER]

Your car is sick bro,congrats on the IMPALAS cover shoot!!!!!!!!!! Cali is always a step ahead..

[95DoubleBubble]

What size are your front bags and how much did you have to trim the spring pockets?

[mrbbody]

Originally Posted by JOHNER

Your car is sick bro,congrats on the IMPALAS cover shoot!!!!!!!!!! Cali is always a step ahead..

thanks bro!

Originally Posted by 95DoubleBubble

What size are your front bags and how much did you have to trim the spring pockets?

RE7 slam specialties. just cut the normal amount. i dont have shocks in the front, havent noticed any accessive bounce yet.

[95wx3ss]

Just went through the whole thread, simply amazing! I love everything you did especially the door panels. If you don't mind me asking how did you re-attach the door panels?

[mrbbody]

Originally Posted by 95wx3ss

Just went through the whole thread, simply amazing! I love everything you did especially the door panels. If you don't mind me asking how did you re-attach the door panels?

thanks! as far as attaching it , to the doors, used new hardware , if you
mean to assemble them i used rivets,and a plastic welder(soldering iron)

[95wx3ss]

Originally Posted by mrbbody

thanks! as far as attaching it , to the doors, used new hardware , if you
mean to assemble them i used rivets,and a plastic welder(soldering iron)

Thanks for the reply. I meant assemble. What size rivets did you use? Are they visible or can you feel them through the upholstery?

[mrbbody]

Originally Posted by 95wx3ss

Thanks for the reply. I meant assemble. What size rivets did you use? Are they visible or can you feel them through the upholstery?

off hand, i forget the size rivets, but i used them with washers on the one side. and no, you cant see them and have to try hard to feel for them. you could pre drill them or just b carefull not togo through the fabric.