| ||||
| ||||
|
#11
02-16-2013, 07:52 AM
|
|||
|
|||
I have a 3.08 non posi rear end in my garage that my dad gave me. Are the gears and axles the same in non posi rear ends? If so I'll only buy new seals, bearings, gear set and a posi and use the parts from the non posi unit to build one.
|
| Sponsored Links | ||
Advertisement | ||
|
#12
02-17-2013, 11:10 AM
|
|||
|
|||
|
If you're wanting to do gears anyway, I would build the other axle and then when the time comes just swap the whole thing as one unit. As stated above some end play is normal. Without inspecting the actual ends of the axle inside the differential you can't really judge.
So long the non-posi is an 8.5 in rear end from an impala all the major pieces are identical. You may want to double check with a search about 9c1 axle widths vs impalas I know there are some differences.
__________________
 '95 B4U T56 in Purple Pearl with a few add-ons. Currently dead. Engine block is at the machine shop and it should hopefully be back on the road mid June. '63 C10 LT1/4L60E from B-Body. Rides like a Cadillac thanks to air bags. '06 GTO LS2/T56 Torrid Red with CAI and Borla Cat-back thanks to the lady who rear ended me. Still in Wichita.
|
|
#14
02-18-2013, 11:36 AM
|
|||
|
|||
|
Quote:
The diff can interchange but I assume the axles are not the same length
__________________
\'96 BBB 383/T-56
|
| Sponsored Links | |
Advertisement | |
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
