Chevy Impala SS Forum banner

FS: Forged LT1/4 383ci (ERE #3)

7K views 25 replies 9 participants last post by  KW Baraka 
#1 · (Edited)
ERE#3 For Sale

This short-block 383 engine was recently professionally rebuilt (by Long's Machine Shop, San Antonio, Tx) due to a blown head gasket. The block, crank, pistons and rods were all checked/cleaned. Block deck was still even but the cylinders were rehoned.

The engine features the following:

Ohio Crank forged 4340 steel 3.75” crank (re-polished)
Eagle Forged 6.0” H-beam Rods
Mahle Flattop Pistons with -16 Valve Reliefs
Milodon Splayed caps
Clevite Bearings
Mahle Rings
New stock oil pan
Melling M-55 HV oil pump
Stock balancer Hub
B&M Flexplate
11.14 static compression ratio if you go with .030" gaskets and 54cc heads
Custom cam; 228/234/110 with .611 lift on both intake and exhaust using 1.6 rockers


$3750 + shipping via UPS Freight.

Thx!

KW
 
See less See more
#4 ·
No.

All strokers are used blocks.

And all strokers are rebuilds.

And this rebuild, all forged, has zero miles on it.

Thx.

KW
 
#9 ·
Quit crapping on this guy's thread. If you don't like the price, keep your yap shut and move along. If you're trying to bargain with him - do it over PM. You're not the arbiter of "good deals".

The mill is too rich for my blood, but if I had the cash, I'd definitely be interested. The workmanship is worth a premium.
 
#13 ·
THIS^^^^^^ Alex!

This is an awesome move for someone. Had I not already been done with my build I'd be all over this. Someone please make the move....PULL THE TRIGGER!
 
#18 ·
Bump for a great guy....and one hell of a deal!
 
#23 ·
No.

It has only what I listed.

You'll need heads/intake and accessories.

KW
 
You have insufficient privileges to reply here.
Top