hotchkiss sway bar kit

[805kingpin]

before i have the bars em installed wanted to see if there's anything special i need to replace to go along with the front and rear sway bar......i have extended upper and lower rear control arms and a extended driveshaft from denny's already so if there's anything im missing, please help me out felllas.....thanks!

[RJI]

Have you had the drive shaft angle at the pinion and trans checked after the extended arms were installed. Also have you installed an off set pinion snubber? Otherwise the stock one may rub on the pinion flange .

Just one of the little details to keep it all smooth

[805kingpin]

Originally Posted by RJI

Have you had the drive shaft angle at the pinion and trans checked after the extended arms were installed. Also have you installed an off set pinion snubber? Otherwise the stock one may rub on the pinion flange .

Just one of the little details to keep it all smooth

check!!! so i dont gotta do anything to the front arms, i didnt know if the stiffer bars wud affect them like the back ones.....

[1slow96]

Just bolt the front ones up,and you're good.

[805kingpin]

thanks fellas!