| ||||
|
New User? Register - Forgot Password | ||||||
| Register | Garage | Photo Gallery | FAQ | Members List | vBClassified | Googlemap ME | Calendar | Search | Today's Posts | Mark Forums Read | Auto Escrow | Auto Loans |
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
I have a set of the Original sprint springs but just the front only. The springs were bought a while back from the owner of the badbodies club dont remember his name since it was a long time ago
The springs do not have over 65,xxx but not sure of the millage but no visiable sagging was seen when installed. I dont know the exact drop of the springs but the picture of my car on my page has the springs installed with the stock rear 9c1 springs in the back. I an looking to get 100+shipping for them
__________________
93 caprice 9c1 LO5, Rebuilt 350 9:1:1 ratio and rebuilt 4l60 with a shift kit. Impala SS Seats with a custom painted interior. Chrome Craggars with BF Radials. Heddman Elite shorty hedders, Clear Image Tubular Cross member, pipes straight back |
| Sponsored Links | ||
Advertisement | ||
|
#2
|
||||
|
||||
|
do u have the part number for the springs? might be interested if it's only about a 1" drop. if it is, how much shipped to 92707.
__________________
![]() Quote:
![]() 94 DGGM Caprice LS-130k-New Project ![]() 95 Caprice L99 SS clone -80k LT1 swap- Sold (best car I ever owned)
|
|
#3
|
||||
|
||||
|
Sadlly i do not have the P/N the tags on the springs are gone if this helps they were bought in 2006 and I do not have the paperwork for them since it was a deal off of badbodies and the site is gone. If I am correct the caprice that I have had the 9C1 springs and after the replacement it lowered it 3 inches.
To the best of my knowledge the top of the wheel well trim to the ground measured 25" but it could be a little higher or lower its been a while since I did all the measurements. Ill take a pic with a tape measure next to them. The are about 15" long
__________________
93 caprice 9c1 LO5, Rebuilt 350 9:1:1 ratio and rebuilt 4l60 with a shift kit. Impala SS Seats with a custom painted interior. Chrome Craggars with BF Radials. Heddman Elite shorty hedders, Clear Image Tubular Cross member, pipes straight back |
|
#4
|
||||
|
||||
|
Here is a pic with the sprint springs installed in the front and 9c1 springs in the rear
__________________
93 caprice 9c1 LO5, Rebuilt 350 9:1:1 ratio and rebuilt 4l60 with a shift kit. Impala SS Seats with a custom painted interior. Chrome Craggars with BF Radials. Heddman Elite shorty hedders, Clear Image Tubular Cross member, pipes straight back |
|
#5
|
|||
|
|||
|
Hello do you still have these springs available
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|