Chevy Impala SS Forum banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
I was lokking into a set of 1.6 pro magnums roller rockers and wanted to know do I need self aliging or non self aliging stock heads and cam
basically a bolt on car. part# cc-1318-16 (self aliging) or cc-1302-16 (non-self aliging).
 
G

·
Discussion Starter · #4 ·
just depends on what you are running cam wise, comp cams suggests non-self aligning rockers when you have got .550 lift or higher, which i dont think is your case. Anything below-self aligning is cool.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top