Chevy Impala SS Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
652 Posts
Not all strokers are the same. If a yank was designed to stall at 3200 behind a stock engine, it is probably right-on. A 400+ rwft-lbs stroker would probably make it to flash to 3400 rpms or so. Yanks are much tighter than Edge or similar converters.
 

· Registered
Joined
·
358 Posts
My 3600 Yank will hit and hold 4000+ when I hammer it in 3rd gear, mine is not a stroker, I am sure if it was the torque would cause it to be a little higher.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top