Chevy Impala SS Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
406 Posts
Discussion Starter · #1 ·
** Moderators, I hope you dont mind me posting these older slightly off topic parts.. **




...All these parts are from a SMALL JOURNAL 327! All parts came off a RUNNING & DRIVING Corvette, I know the car they came off of..



Also, all information regarding casting #'s was taken from this site:

http://web.archive.org/web/20080506065350/www.mortec.com/castnum.htm" rel="nofollow">http://web.archive.org/web/20080506065350/www.mortec.com/castnum.htm



First up I got two different crankshafts, one of them appears to be re-ground, the other one im not sure of..

The one that appears to be re-ground has only one notch on the end where the harmonic balancer goes.. The other one has two.. Please look at the pics carefully to determine wich one you want.

They are both 2680 castings. Asking $100 OBO for each one.




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06



Next up: A matching pair of Camel Hump , Fuelie , Double Hump , Camel Back ....whatever you want to call them heads. These are 462 castings (3890462 is the complete number) with 1.50" / 1.94" valves, no accessory holes, 64cc. I have the rockers for them as well. Asking $300 OBO




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06



Next up: A NEW set of .40" over DOMED pistons with rods. Brand and material unknown. $150 OBO




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06



Next up: A used set of .30" over Speed O Motive FLAT TOP pistons with valve releifs, material unknown. No Rods with the set. $100 OBO




By punkassgearhead at 2010-09-06




By punkassgearhead at 2010-09-06
 

·
Registered
Joined
·
406 Posts
Discussion Starter · #2 ·
To The Top...
 

·
Registered
Joined
·
1,770 Posts
Would you have the exhaust manifolds from this engine ?
 

·
Registered
Joined
·
406 Posts
Discussion Starter · #4 ·
The ramhorns are long gone, sorry.... Ttt..
 
1 - 4 of 4 Posts
Top