Chevy Impala SS Forum banner
1 - 11 of 11 Posts
G

·
Discussion Starter · #1 ·
Im about to get Dynomax 2.5 inch pipes, and Summit Turbo 2.5 with an h-pipe installed, resonator delete. I dont have an air intake, I just bought a kit for 10 bucks on ebay, and paid 20 for shipping. It has the pipe, clamp, filter. 3.5 inch intake. What about the air pump delete? Im not planning on a PCM reprogram soon, any way I can keep it on without ingesting dirt?
 
G

·
Discussion Starter · #2 ·
1) Unplug AIR Pump connector, & tape it up to prevent short.
2) Order a Plug, GM PN 12569122[approx. $1], and plug AIR intake hose at air filter box.
Or substitute a 9/16"-5/8" diameter short bolt as a plug.
3) Leave AIR Pump Relay & Fuse in place, in underhood box.
 

· Registered
96 chevy impala ss 5.7
Joined
·
4 Posts
1) Unplug AIR Pump connector, & tape it up to prevent short.
2) Order a Plug, GM PN 12569122[approx. $1], and plug AIR intake hose at air filter box.
Or substitute a 9/16"-5/8" diameter short bolt as a plug.
3) Leave AIR Pump Relay & Fuse in place, in underhood box.
Trying to find a plug, can't find it nowhere.
 

· Registered
Joined
·
8,013 Posts
Rubber caps work just as well.
 

· Registered
Joined
·
231 Posts
Is this the location you are referring to?
Automotive tire Vehicle Automotive design Motor vehicle Reflex camera
 
  • Haha
Reactions: 91ss
1 - 11 of 11 Posts
Top