Chevy Impala SS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
694 Posts
Discussion Starter · #1 ·
Sorry guys but my coil stopped working. I had an MSD coil on and it literally melted,.. the clear yellow goo/sealant was dripping off the coil onto my wires. So I tried a stock coil I have and it isnt making spark and I couldnt find much in the FSM, maybe i just looked in the wrong place.
I was just hoping to find out,
Does the coil make spark the entire time it is supplied power? Or does the coil have a signal wire telling it to spark??

Whats hot, whats not, what makes signal? Also about the ICM,..?

Im hoping I can figure out the issue after I find out what voltage to expect from what wire.

Thanks for any help,
ZACH
 

·
Registered
Joined
·
694 Posts
Discussion Starter · #4 ·
Im getting no power from B5 on the BLACK connector to the PCM. I should have power coming from there to the ICM correct?

Thanks for the in-depth and explanative answers.
ZACH
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top