Chevy Impala SS Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
581 Posts
The upper dash assembly does not have to come out to remove or install a stock cluster. Just pull the gauge cluster bezel and the lower dash assembly off and there is more than enough room to pull it out and put it back. If you are upgrading to the Z28 cluster you will probably have to pull the upper dash off though. And to pull it off there is a series of screws along the edge of it and then just work it off gently so you don't break anything under the dash. - Peter
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top