Chevy Impala SS Forum banner
1 - 19 of 19 Posts

·
Registered
Joined
·
5,274 Posts
Good work Dan!.
I just got 2 dates at Cecil for double headers:
May 14th and Oct 22!

Nab
 

·
Registered
Joined
·
5,274 Posts
Dan,

I got 100 octane.
I'll can get it for you @ $6 a gallon.
LMK

Nab
 

·
Registered
Joined
·
5,274 Posts
May 14 double header at Cecil County Dragway needs sponsors too :)
Also checking to see if Mason Dixon on Apr 23 can be a double header.

Nab
 

·
Registered
Joined
·
5,274 Posts
Elmer would let us do that!
May have to be a hot lap race.

Will ask.

D
DAN,

It's already done! He said we could have 2 eliminators for one $25 tech card!
What a deal! With 2 races at $25, I bet we'll get a 32 car race!

Nab
 

·
Registered
Joined
·
5,274 Posts
Thanks Dan. Now we need one more sponsor for Mason Dixon Race 2.
 

·
Registered
Joined
·
5,274 Posts
Loveshack drag day at Mason Dixon is double header too!

Nab
 

·
Registered
Joined
·
5,274 Posts
Bill,

Could you please update your most recent schedule.
Loveshack drag day at Mason Dixon on April 23 is double header too!

Thanks,

Nab
 

·
Registered
Joined
·
5,274 Posts
So who's car is ready for the first race?
I just defrosted April's block that I forgot didn't
have antifreeze and froze solid back in Jan.
and luckly only the thermostat housing gooseneck cracked in half.
The ImpalaMASTER and DragCAT need water but are READY!

Nab
 

·
Registered
Joined
·
5,274 Posts
Barry, I'd get some super light weight Mahle 383 pistons.
Jimmy Cox machine shop out my way does engine balancing.
His number is 301.884..

Also George Cox machine in Alexandria does balancing. I don't have his number but I think Lance does.

Nab
 

·
Registered
Joined
·
5,274 Posts
Barry, here's the link for .030 over forged Mahle pistons for 3.75" stroke & 5.7" rods w/a 16cc dish for 10.5 compression.
MLE-SBC425030I16

http://www.summitracing.com/parts/mle-sbc425030i16/applications

Using these lighter pistons means you can shave a lot more weight off the crank
therefore lightening up the entire rotating assembly for quicker acceleration and more horse powers! :)

Nab
 

·
Registered
Joined
·
5,274 Posts
GPS address: 20 Island Rd, Great Meadows, NJ
 

·
Registered
Joined
·
5,274 Posts
C'mon Dan, lets be accurate.
ECIRS' Super Sedan Shootout Race #1
Englishtown Raceway Park
SUNDAY Apr 3.
Gate: 8 AM

Nab
 

·
Registered
Joined
·
5,274 Posts
Timmay! Ya gotta have confidence man!
You got the powa to overcome a shizzy light!
Just dial a 14.0 and let off at the 1000'!

N
 

·
Registered
Joined
·
5,274 Posts
Let's be Accurate:

WHAT: ECIRS Super Sedan Shootout 2 & 3.
STRIP: Mason Dixon Dragway
WHERE: Hagerstown, MD
GATE: 12pm
2 races $30 tech card.
 

·
Registered
Joined
·
5,274 Posts
Do you mean too much head or overheated it?

I just yanked my motor out this morning. 11.8 engine is too slow.
alum head 383 goin in tomorrow :)
cam is only a lil 227/235 w/ .565 lift on a 110.
Should be good for 10.90 w/ 4.56 gears @ 3130 race weight.
Is it possible?
What do ya think?

Oh yeah, gotta weld a roll bar in real quick before Sat.

Nab
 

·
Registered
Joined
·
5,274 Posts
No super glue, just high strength exhaust pipe bent
to the proper dimensions!

I got the 50 lb injector fuel rail, opti, and alt ONLY setup
transferred to new motor. Just got to find the SFI flexlplate that
I cut the weight off of for neutral balance.
Motor drops in so nice with Wiper cowl cut out of engine bay.

BTW, the WEATHER is looking GREAT for Sat. Showers are comin'
in on Friday morning and GONE by Sat.

Nab
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top