Chevy Impala SS Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
3,366 Posts
Discussion Starter · #1 ·
Please see original post for reputation and information.........http://www.impalassforum.com/vBullet...d.php?t=229596

************************************************** ************

These improved bleeder valves allow you to bleed air from the coolant (something necessary every time you change coolant) without running antifreeze all down the front of the engine and onto the otpi. Simply add your own hose (I used an old opti vent hose) and run it to where ever it suits you. This is a direct replacement of the factory bleeder valve. Please note the pictures shows a brass valve, the valve you will get is a brass valve that is Nickel plated (see lower picture).







Please see above picture of my brass valve installed on my Impala.

(1) - $16 shipped in lower 48
(2) - $25 shipped in lower 48
(3) - $33 shipped in lower 48
(4+) - Add $8 for every valve above 3
Add $9 for Canada shipment due to customs paperwork and a drive to the post office.

I generally ship on Saturdays or Mondays depending on my travel. The valve ship USPS unless you want a different service. Please add $ for special shipping. Install with Teflon thread tape or thread sealer for best results.

Paypal me at [email protected] I will pay the fees.

Tim
 

·
Registered
1996 ImpalaSS WX3
Joined
·
549 Posts
Please see original post for reputation and information.........http://www.impalassforum.com/vBullet...d.php?t=229596

**

These improved bleeder valves allow you to bleed air from the coolant (something necessary every time you change coolant) without running antifreeze all down the front of the engine and onto the otpi. Simply add your own hose (I used an old opti vent hose) and run it to where ever it suits you. This is a direct replacement of the factory bleeder valve. Please note the pictures shows a brass valve, the valve you will get is a brass valve that is Nickel plated (see lower picture).







Please see above picture of my brass valve installed on my Impala.

(1) - $16 shipped in lower 48
(2) - $25 shipped in lower 48
(3) - $33 shipped in lower 48
(4+) - Add $8 for every valve above 3
Add $9 for Canada shipment due to customs paperwork and a drive to the post office.

I generally ship on Saturdays or Mondays depending on my travel. The valve ship USPS unless you want a different service. Please add $ for special shipping. Install with Teflon thread tape or thread sealer for best results.

Paypal me at [email protected] I will pay the fees.

Tim
Are these bleeder valves still available anywhere ?
My bolt head is stripped on my SS and I would love to find one as is pictured above.
Thank You for your time...
 

·
Registered
Joined
·
7,729 Posts
Has to be one of the best low-buck mods of all time.
 
  • Like
Reactions: Marky Dissod

·
Registered
1996 ImpalaSS WX3
Joined
·
549 Posts
Has to be one of the best low-buck mods of all time.
I agree...
I just ordered one yesterday so I’m anxious to get it installed and the tubing run...
Thank you 1slow96 for your input !
I appreciate all the information and feedback you provide !
 

·
Registered
Joined
·
2,155 Posts
I'll be honest. I bought 2 from you years ago. Just found the second one in my box of things this weekend and managed to finally install the second one on my C10 swap. 1st has been on my Impala for years now. So much nicer to bleed with no mess.

-Brian
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top