Chevy Impala SS Forum banner

1 - 20 of 29 Posts

·
Registered
Joined
·
2,234 Posts
Discussion Starter #1
gonna put my forged 383 LT1 up for sale. just got too many other projects
these parts are all used
Eagle crank/rods/srp pistons in two bolt block, ported AFR190's back from shop with new springs and hardware, comp stainless hi-tech rockers, AFR hydra-rev kit, moly pushrods,

these parts are all new
crane billet cam, gm lifters, svo 30# injectors, bbk 58mm throttle body, delco opti, msd cap/rotor, aeromotive fuel pressure regulator, arp head bolts, melling select pump and pick-up, fel-pro 1054 head gaskets, fel-pro intake gaskets, fel-pro assembly gasket set,

also have a spare '96 LT1/4L60E to go with for pan, valve covers, bolts and such. as well as a 95 timing cover.

there may be some stuff i have forgot i have for this in the cabinet of bankruptsy. LOL

sell it all for $5000 firm but may entertain trades. also may part out but not planning cause i will just slap it together and put it in the station wagon if it don't all sell.
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #2
few pics i have




 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #3
had the heads flowed by a shop other than one that ported to get an honest report. have sheet but these are the #'s

.200 - 145/100 69%
.300 - 206/138 67%
.400 - 239/173 72%
.500 - 259/185 71%
.600 - 267/192 72%
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #4
have had several pm's about parts. i'll give this another week before considering parting it out
 

·
Registered
Joined
·
1,923 Posts
Eagle crank/rods/srp pistons, comp stainless hi-tech rockers, AFR hydra-rev kit, moly pushrods, crane billet cam, gm lifters, svo 30# injectors, arp head bolts, melling select pump and pick-up....

Interested in this much if you decide to seperate.

Jerry...
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #6
i'll let everyone know in the order they pm/post. the shortblock is assembled if that makes a difference due to shipping cost.
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #7
i've been having trouble logging on here. if it takes awhile to respond that is the reason.
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #9
Gonna decide this weekend. Post or pm what you may be interested in. If I have enough interest in big items. Then I will.
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #10
don't look like there is enuff interest to part out. don't need these heads, cam and pieces for my old motor. plus it turns out my 10 year old was upset when he heard me talk about sellin it to buy a 5.3/4lL65 for his 66 truck
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #11
with the 68 camaro project and the 66 truck 5.3 swap project. no way i'm gonna have time to mess with putting this engine in. $3500 complete as is or i may seperate for the right money.
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #13
all pm's replied
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #15
Wood u b able to come up to nshs1 and bring it?
15 hrs 5 mins / 905.48 miles..............one way. i might could meet halfway
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #16
All new pms replied. Gonna give buyers of complete engine till end of next week to get funds, shipping, etc. then i'll be contacting those wanting parts. More than enuff interest to part out so it will happen if not sold whole
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #17
To save my pm box. I'll post part out prices. cuz most interest here are the two big items

shortblock $1400
Heads $1200
Heads + revkit $1300
Heads + revkit + rockers $1550

Parr out may start tomorrow when I get home due to pooular demand LOL
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #18 (Edited)
following parts sold: shortblock, opti, 30# SVO, lifters, revkit, oilpump/pickup

whats left

heads $1200 with arp botls torqued once not ran (full specs on request)
intake portmatched to heads and for 58mm by me $150
BBK 58mm $250 mounted not ran
comp cams 1104-16 Hi-Tech stainless 1.50 rockers $250 (7 dyno pulls)
engine works 5/16 X .083 7.200 moly pushrods $75
Crane 109661 cam $250 (new installed never run)
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #19
Pm's replied

For those interested. I'll sell all left for $1900 with new felpro intake and torqued once never ran felpro 1074 head gaskets
 

·
Registered
Joined
·
2,234 Posts
Discussion Starter #20
throttle body sold
 
1 - 20 of 29 Posts
Top