Chevy Impala SS Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
73 Posts
Discussion Starter · #1 ·
Will the rear swaybar work in my 96 Roadmonster wagon? Seem to remember that the width may be different???

What else should I get out of it other than the front bar?

It has certified speedo.....
 

· Registered
Joined
·
52 Posts
so you found a 9c1 caprice sedan? wagon rear end=3" wider than sedan.
 

· Registered
Joined
·
73 Posts
Discussion Starter · #3 ·
yes, sedan.
Are the control arms in the same place so the swaybar will work?
I wonder what gears are in the rear. I'll look for data tag.

Anyone know if the RMW grille will attach to the Impala hood?
 

· Registered
Joined
·
1,911 Posts
Probably the only way to get the bar to work properly would be to buy Metco LCAs which have mounting holes for sedan or wagon width rear bars.
 

· Registered
Joined
·
153 Posts
Starting working on mine yesterday,the bar has to be moved forward about 2 1/2" and you also need a 1/2" spacers for each of the bolts in order to clear the pumpkin.
 

· Registered
Joined
·
305 Posts
Probably the only way to get the bar to work properly would be to buy Metco LCAs which have mounting holes for sedan or wagon width rear bars.

It's the only way to go:)


 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top