Chevy Impala SS Forum banner

1 - 20 of 22 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter #1 (Edited)
PROCHARGER KIT
I have a Procharger Kit I bought from "Fat boys SS" on the forum and most of the description is from his post.

ProCharger bracket for a B body. Bracket is polished
Crank Pulley from ProCharger 8 rib
Crank spacer which "Fat boys SS" had duplicated from a Kit he purchased
Tensioner pulley 8 rib and Tensioner bracket
Bracket spacers
Stainless steel bolts
ProCharger bypass valve (with vacuum port broken)
*I also purchased a used Procharger Proflo Surge Valve

The bracket will hold a P1SC and D1SC
The crank spacer must be used with a ATI B body dampener. This spacer is Hub Centric and cost a lot of money to get duplicated.

You could pick up a P1SC from ebay for about $800-$1000 and some intercooler piping and the kit is complete.

I would like $700 plus shipping and paypal fees.

TRICK FLOW LT1 ELBOW
Trick Flow LT1 Air Inlet Elbow that is powdercoated black. Was not used but has a couple scuffs. Includes couplings, but does not have the grommet for the IAT. Should be easily found at any auto parts store.

I would like $50 plus shipping and paypal fees.

RAISS INTAKE****SOLD!!!
I have used RAISS intake with all the bolts and screw for the air deflector. Raw finish with a new black silicone 4" X 3.5" reducer. MAF extension is not included.

I would like $225 plus shipping and paypal fees.

GEN II TRI-Y HEADERS****SOLD!!!
I have a set of used Clear Image Automotive GEN II Tri-Y coated headers. Includes gaskets and header bolts. The headers are in good used condition with some scratches and minimal rust. Note that the guy I bought them from had hammered on one of the primary tubes to clear a spark plug wire. (I think he had the wrong wires because this should not have to be done.) Please see pics.

I would like $550 plus shipping and paypal fees.

I will add pics in the following posts.
 

·
Registered
Joined
·
189 Posts
Discussion Starter #2
Procharger Kit
 

Attachments

·
Registered
Joined
·
189 Posts
Discussion Starter #7 (Edited)
GEN II Tri-Y Headers****SOLD!!!
 

Attachments

·
Registered
Joined
·
1,769 Posts
Interested in the Raiss, pending a quick question....are you running a suncoast hood? Based on the hood spring relocated, looks that way....if so how did this intake work with the hood? Pics>?
 

·
Registered
Joined
·
189 Posts
Discussion Starter #10
Worked great with the suncoast hood and I do not have any more pics with it on the car. I removed it last week.
 

·
Registered
Joined
·
2,245 Posts
Bump for a great Seller!

Got my RAISS today, just as decribed. Thanks Again!
 

·
Registered
Joined
·
189 Posts
Discussion Starter #12
Your welcome and thanks for the feedback.
 

·
Registered
Joined
·
189 Posts
Discussion Starter #18
Bump for March

Procharger Kit and TrickFlow Elbow still for sale.
 

·
Registered
Joined
·
189 Posts
Discussion Starter #19
Procharger kit and TrickFlow Elbow still for sale. TrickFlow Elbow would great for someone making a CAI like the Team SS pipe. If no interest the elbow will be going on Ebay before long.
 

·
Registered
Joined
·
189 Posts
Discussion Starter #20
Trickflow Elbow SOLD!!!

Procharger Kit still available.
 
1 - 20 of 22 Posts
Top