Chevy Impala SS Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
43 Posts
For me it inserts into the connector, push to connector and tool in, then pull apart. That is all I have to do. I have one line held on with a hose clamp. Also, on the wagon aleast there is one other hose from the tank to the fill area, other than the fill hose itself.

I took mine off last night. Pump is here but the sending unit was broken inside, which may have caused the pump failure.

I just replaced them in June, and am half way through with the current replacement.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top