Chevy Impala SS Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter · #1 ·
does any one know if this is possible with small mods? removing base off of the grand prix seat and mounting it to the impalas electric base?( maintaining original controls)
 

·
Super Moderator
Joined
·
6,003 Posts
Yes, pretty much the same as the Bonneville seats. I sold a set to a guy that put them in his 9C1.
 

·
Registered
Joined
·
118 Posts
I put some Park Avenue front seats (w/ power recline) in my RMW, in place of the stock manual-recline ones. An easy swap. The rail spacing was different, but two sets of pre-existing holes in the seat pans allowed everything to line up correctly. Not surprisingly, within a given time period GM parts were fairly standardized and compatible across the car lines.
 

·
Registered
Joined
·
42 Posts
Discussion Starter · #4 ·
im trying to maintain the original controls, the pass. seat isnt power(on the grand prix seats) so i was thinking about mounting the seat to the impala seat base. anyone do anything like that?
 

·
Super Moderator
Joined
·
6,003 Posts
To expand on my post:
Had a set of Grand Prix seats with rails. Sold them to a friend. He removed the rails, and bolted the seats to the stock B body rails, and installed them in his 9C1.

Does that help?
 

·
Registered
Joined
·
42 Posts
Discussion Starter · #6 ·
Thnx! That's what I needed to know!! How did your friends come out?
 
1 - 6 of 6 Posts
Top