Chevy Impala SS Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
6,706 Posts
What kind of clearance does the HD12 kit require? Other KORE3 kits provide a template, not sure if there is any other way to specify that required clearance.
 

·
Premium Member
Joined
·
6,706 Posts
Trouble is I'm looking at using a non-OEM rim. Perhaps I should take this offline.

They are 18x9.5 with a -4mm offset and 5.031" backspace, might even go with 18x8 with a +2 mm offset and 4.517" backspace up front though if clearance is going to be an issue with those I'll just ditch the staggered approach altogether.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top