Chevy Impala SS Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,782 Posts
Did you bed the pads in initially?

http://www.stoptech.com/tech_info/wp_bedinstock.shtml

If not, try that 1st. Should problem persist:
To narrow it down-- switch pads from left to right and see if the noise follows the pad....
Will narrow down whether it's pad or rotor related, but if switched, rebedding will be necessary.

Might want to dab the ABS sensors w/ some hi-temp lube just for shots and goggles.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top