Chevy Impala SS Forum banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
9,369 Posts
The driveshaft yoke locates the output shaft, so you must measure the output shaft play when the driveshaft is installed.

If you have a thump/thunk over bumps, check your shock mount bolts, especially if you've changed shocks. I found mine loose a year ago. I traced it to a bad torque wrench.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top