Chevy Impala SS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,175 Posts
Fuel Level and oil pressure are not wired to the computer in the original harness. I thought idle cracker was for drive by wire throttle bodies. You should have IAC counts for the cable throttle. Not sure which O2 you're trying to view. If you're trying to watch the second set they don't exist in a 95.

-Brian
 

·
Registered
Joined
·
2,175 Posts
Sorry just actually looked at your screen shot. You can't graph any data if it's not I. The list of things being scanned on the LH white page. That's why O2mv, Inj Duty Cycle and a couple other things have no graph data.

-Brian
 

·
Registered
Joined
·
2,175 Posts
I would edit this list to remove oil pressure, idle cracker and fuel level. Won't get any useful data from them anyway. Then add the bank 1&2 O2 mv if you wish. I've found with the hangi g on throttle close, I've got to watch the IAC counts. If they seem to hang wide open for a while this likely needs to be tuned to close faster. I am still struggling a throttle hang when the motor is cold. Once warm I don't have this issue.

-Brian
 
  • Like
Reactions: blueallie
1 - 3 of 3 Posts
Top