Chevy Impala SS Forum banner

Idler Arm

717 Views 2 Replies 0 Participants Last post by  95_LT1
How hard is it to change the Idler Arm on a 95 9C1? Do I need any special tools for this? Thanks, John
1 - 3 of 3 Posts

You will need an alignment after the Idler arm replacement. I just gave the new arm to my alignment guy and he charged me an extra $10 to put it on. You will need a special tool to remove the ball joint where it attaches to the steering arm. Then just the 3(I think) bolts on the frame.

Matt Stevens
96 DCM Vortech, ramair,
to much other stuff :)
Thanks for the info MattS
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.