Chevy Impala SS Forum banner
21 - 24 of 24 Posts

Registered
Joined
11,703 Posts
Got the rear home. It is a posi. Has the stainless tag saying use additive. The unit appears to be good. I had my son help with the torque wrench on the lug nut like Frank mentioned earlier in the post.
The bad is, the ebrakes are non existent under the rotors. Nothing is there. So I鈥檒l do some digging and look for the hens teeth and unicorn tears 馃榿 or figure something out. Only need the ebrakes for inspection. Thanks for all the help!
I believe that Rock Auto has a lot of the e-brake parts.
 
  • Like
Reactions: blueallie

Premium Member
1995 Roadmaster Sedan
Joined
176 Posts
Discussion Starter · #22 ·
I believe that Rock Auto has a lot of the e-brake parts.
Thanks Fred, I鈥檒l check it out. I apologize for typing Frank earlier. The torque wrench idea was a pretty neat way to check the posi. I was also leaning towards the old Cadillac style calipers as a worst case scenario.
 

Registered
Joined
11,703 Posts
The FSM is my source for the torque evaluation of the posi.
 
21 - 24 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top