Looks stock on outside. Everything you can think of is removed on inside.
It's basically an engine and a seat
Nab
It's basically an engine and a seat
Nab
Jackalope goes 10.87 @ 121 MIR Nov. 13, 2016
Just wanted to report the my son, John's "jackalope" 3300 lb 9C1 (world's lightest)
broke into the 10s with a 10.87 @ 121 mph & 1.489 60' time on 150 dry shot of spray thru the MAF.
The MAF picks up the air density and adds fuel, plus we are dumping 20% more fuel in the RPM WOT table in the pcm.
The run was pretty cool b/c his black 9C1 was racing a black Charger 392 SRT8.
We should have put up $20 on the run. LOL
Back-up run was about an hour later 10.89 @ 120 w/ 1.464 60 foot.
The car was running 11.90s all-motor.
Mods:
355LT1- Snowflake's old forged pistons and original gapless rings w/ about 600 quarter mile runs.
Piston to wall clearance is super loose and sounds like a diesel when running.
Block donated by Lance Bachman .030 over 2 bolt main
6" scat rods from Lance's blown up 383.
Stock Iron heads
Comp 502 cam
Stock rocker arms & pushrods
Stock timing set
Electric Water pump
50 lb delphi injectors
stock fuel pump
Alternator only
NO AC or PS
ATI 4500 stall converter
TH375 trans
4.56 gears & stock axles
MT 28 x 10.5 full slick on
15x9 Weld Drag Lite XPs
165/80- 15 front tires on Summit 5 x 4.75" skinnies.
Check the slip:
broke into the 10s with a 10.87 @ 121 mph & 1.489 60' time on 150 dry shot of spray thru the MAF.
The MAF picks up the air density and adds fuel, plus we are dumping 20% more fuel in the RPM WOT table in the pcm.
The run was pretty cool b/c his black 9C1 was racing a black Charger 392 SRT8.
We should have put up $20 on the run. LOL
Back-up run was about an hour later 10.89 @ 120 w/ 1.464 60 foot.
The car was running 11.90s all-motor.
Mods:
355LT1- Snowflake's old forged pistons and original gapless rings w/ about 600 quarter mile runs.
Piston to wall clearance is super loose and sounds like a diesel when running.
Block donated by Lance Bachman .030 over 2 bolt main
6" scat rods from Lance's blown up 383.
Stock Iron heads
Comp 502 cam
Stock rocker arms & pushrods
Stock timing set
Electric Water pump
50 lb delphi injectors
stock fuel pump
Alternator only
NO AC or PS
ATI 4500 stall converter
TH375 trans
4.56 gears & stock axles
MT 28 x 10.5 full slick on
15x9 Weld Drag Lite XPs
165/80- 15 front tires on Summit 5 x 4.75" skinnies.
Check the slip:
Attachments
1 - 2 of 8 Posts
1 - 2 of 8 Posts
