Chevy Impala SS Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
4,799 Posts
Discussion Starter #1 (Edited)
Cleaning out the garage. I have a lot of good parts that I no longer need, and they need a new home.
I'm taking pictures and adding items to the list as I pull them out of boxes and off the shelves.
Sample pictures included below, more available on request.

Not listed here, I also have BBC parts, including a 396/402, 66 2-bolt block with forged crank and 21cc dome pistons, 70 820 open chamber heads with 113cc chamber. LMK if interested.


  • CAI Quad 1 3/4 headers with EGR - POR 20 silver paint, VBand clamp welded on the collector - $450
  • March Performance Underdrive crank pulley - $50 (SOLD)
  • BBK Power Plus twin 52mm TB with IAC passage - $150
  • BBK Edelbrock twin 52mm TB (no IAC passage) - $175
  • Holley twin 58mm TB (no IAC passage) has bypass hole drilled in IAC opening - $200
  • Cometic .030 MLS gaskets (used for less than a week, cost $160 new) - $50
  • Canton 2pc Rear Main seal adapter (new, never installed) - $100
  • Comp Cams Pushrods 7939-16 - Hi-Tech 5/16" 7.150" (new, never installed) - $75
  • NX Express LS/LT Mass Air Housing N2O kit (new, never installed) - minus bottle and LT1 micro switch - $495

Wagon stuff
  • CAI Wagon OTA side exit pipes with polished tips(new, never installed) - $75 (SOLD)
  • Wagon cargo cover *** GREY *** in very good condition (missing one plastic end) - $150 obo
 

·
Registered
Joined
·
4,799 Posts
Discussion Starter #2
Holley TB, Crank UD Pulley, Head Gaskets, Wagon OTA pipes, 2pc Rear main adapter
 

Attachments

·
Registered
Joined
·
4,799 Posts
Discussion Starter #3
Headers, BBK TB, Edelbrock TB
 

Attachments

·
Premium Member
Joined
·
918 Posts
Gray cargo cover... Lord I want that. Shipping to 30084? Also - got a better pic of the drilled idle passage in the Holley? And a front pic?

Thanks
 

·
Registered
Joined
·
4,799 Posts
Discussion Starter #6
UPS ground according to UPS online is $35.

I installed a throttle stop to fix the TPS high problem with Holley TB's. It's removable if you don't want to use it.
 

Attachments

·
Registered
Joined
·
730 Posts
Any pics of the used opti?
 

·
Premium Member
Joined
·
781 Posts
Interested in the underdrive pulley

Interested in the underdrive pulley shipped to 54911. How do I make payment?

Thanks,
Jim
 

·
Registered
Joined
·
4,799 Posts
Discussion Starter #10
Any pics of the used opti?
I'll get some clean shots of it, and IM a link, or post them here.

Interested in the underdrive pulley shipped to 54911. How do I make payment?

Thanks,
Jim
I'll get it boxed up, estimate shipping, and send you the total cost. I take PayPal, Zelle, Cash App, or you can mail a check if you prefer.
 

·
Premium Member
Joined
·
781 Posts
Sounds good!

PayPal works.

I'll be out of town Friday and Saturday but I can make payment Sunday evening or whenever you're ready after that.

No big rush since the cam is in but the heads aren't even bolted on yet. :p

Thanks,
Jim
 

·
Registered
Joined
·
1,770 Posts
If the pushrods are available I am interested in those, shipping to 60014?
 

·
Registered
Joined
·
4,799 Posts
Discussion Starter #15
Everything here is now gone. Thanks for looking.

However, it's very likely that I'll similar items for sale on eBay soon.
 
1 - 15 of 15 Posts
Top