Chevy Impala SS Forum banner

Mountain Madness final drag racing results

1453 Views 70 Replies 0 Participants Last post by  robh242
G
Super Pro qual:
1. Bry Herter--11.139--122.98mph
2. Nabil Guffey--12.125--114.63mph
3. John Rafteseth--12.333--107.93mph
4. Rusty Neese--12.504--109.37mph
5. Kai Zimmermann--12.560--118.17mph
6. Chris Mallory--12.664--110.66mph
7. Bill DeBlasio--13.134--107.75mph
8. Fred Gramby--13.476--102.00mph

Super Pro final round results:
Win: Bryan Herter, 355LT1, .084RT, [email protected]
RunnerUp: John Rafteseth, 409LT1, .521RT, [email protected]
61 - 71 of 71 Posts
G
Originally posted by stumpy:
Thankfully I have the TCC unlock switch, which I use most of the time when I'm not on the highway.
F That! Just keep it in 3rd gear until you are on the highway! Much more fun to drive that way!
G
Originally posted by Karl Ellwein:
......
Super Natural final round results:
Win: Karl Ellwein, 383LT1, .125RT, [email protected]
RunnerUp: Glen Koenig, 350LT1, .339RT, [email protected]
NIIIICE summertime ET's, boys!

Stumpaloopus!! Great to see the motor is a success .... and I don't think for a moment you have the setup optimized yet ;)
G
DaStump's car is scary strong. It sounds fast, looks fast and is fast. Now how long will his 4L60E last? It's on borrowed time.
G
Originally posted by Karl Ellwein:
Now how long will his 4L60E last? It's on borrowed time.
Say it isn't so.


I'm more concerned about the axles right now, but I hear ya.
See less See more
G
Glen, I'm more concerned about my 4L60E than my axles. How many people have trashed their tranny's? How many people have trashed OEM axles?
G
Hey Everybody:

Just Getting Caught Up After MT Madness. It Was Sure Good To See Old Faces. To Many To List!!

Sorry To All That Came To See The Bad Bowtie Run!!! The NOS Had A Issue!!! Would Not Actavate!!
Fixed Now Though!! So I Ran The Super Pro Class Just On Motor!! Placed 2 nd . Told Bryan To Be A MAN & Turn Off The Bottle. But He Wasen't Having Any Of THAT!! Still Ran Low 11.90's NA!! Traction Was Good! RUMOR Has It That Some One Got A Pic Of Me Pulling Both Front Wheels Off The Ground On Launch!!
I Sure Would Like A Pic Of That Email It To [email protected] Please!!!!

Now For SSHS 5 Web Site Up, Registration UP!!
Let's Go All Only 107 Days To GO!!!!!!

THE BAD BOWTIE
See less See more
G
Boilermaker Wrote: Glen, I'm more concerned about my 4L60E than my axles. How many people have trashed their tranny's? How many people have trashed OEM axles?
Boilmakers To Do List:

Turbo 400 Tranny
New Stall Converter
Aftermarket Axles
Driveshaft
POSSI
SLICKS & Rims
Roll Bar
Fuel System


BEEN THERE & DONE ALL THAT!!!!!

My Trashed Parts Count:

Trannys 10
Converters 3
Axles 2 Sets
POSSI 2
Driveshafts 2
Motors To Many To Count!!!


THE BAD BOWTIE
See less See more
G
John, congrats on the metal at MM. Sorry I had to leave early and we didn't get to talk. See ya in Commerce.
G
Originally posted by Bad Bowtie:

BEEN THERE & DONE ALL THAT!!!!!

My Trashed Parts Count:

Trannys 10
Converters 3
Axles 2 Sets
POSSI 2
Driveshafts 2
Motors To Many To Count!!!


THE BAD BOWTIE
YOUCH!!! Man, I don't feel so bad now.
G
Rob, you don't even want me to START counting the carnage! ALTHOUGH, knock on wood, I have been very lucky with my trannies and TC's.

But motors and posi's don't live too long in a DeBlaz hoofed Impala, that's for sure. Hopefully the 502 and the Area 51 Special have fixed that.
G
Originally posted by Big Kahuna:
Rob, you don't even want me to START counting the carnage!
Yeah, I hear what you are saying Bill, not a list I really want to be associated with!

But motors and posi's don't live too long in a DeBlaz hoofed Impala, that's for sure. Hopefully the 502 and the Area 51 Special have fixed that.
No doubt!
61 - 71 of 71 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top