[Guest]

I just got an NX single nozzle wet kit for my LT1 Caprice. Where is the best place in front of the throttle body to put the nozzle, in the stock elbow or in the sewer pipe?? Where did you mount your solenoids? Where did you mount your bottle? Where did you run your N2O line through the car? Any one have any pics of their setups? Any tips for my instalation? Thanks.

-Jeff

 

[Guest]

If you are running the stock intake elbow then a metal plate in the home plate hole is a good place to mount the nozzle, if you go to a different intake that mounts the MAF right in front of the TB then you can drill into the MAF housing behind the wires and mount it there. Maybe you already have one but I will mention it anyway but spraying in front of the TB is one time when an airfoil is actually a useful device.
Bottles will go in the trunk and the track will require them be vented outside the car(trunk is considered passenger space because of no firewall) since you are running the blowdown tube through the trunk floor you might as well make the hole just a tad bigger and run the nitrous line out there as well and then just up the frame rails. As just aloose guideline mount the fuel solenoid as close as possible to the nozzle and mount the nitrous one further away wherever is convenient. Reason being the nitrous at 900+psi travels a lot faster than the fuel at 43psi. Hope some of that was useful.