[Guest]

What kind of sistem can I use on a 350 TBI with 87 octane gas( mind you that I am a student and can't afford expensive gas), and what kind of stuff would I need? Also, would I need to get a chip for the PCM, or custom programing? I am completely lost, so any help would be appreciated. TIA

 

[Guest]

If you can't afford to run the good gas, you SURE don't need to be bolting on an N2O system onto your ride! Low octane plus N2O is a good way to add holes to your pistons

Just my opinion....

Ed

 

[Guest]

Ok, so supposing that I could use the 92 octane gas, what kind of NO2 kit could I use with the LO5? And is there anyway to run it w/87 octane gas w/o turning the engine into a potential claymore mine?

 

[Guest]

Ed is not giveing an opinion, he's giving a fact!sputter-sputter-bluesmoke-KABOOM-byebye

 

[Guest]

You are still missing the core question!! So I'll use the good gas, but still, what kind of NO2 system can I use on a TBI engine?!?

 

[Guest]

hey Dude,

Any TBI N2O system will work with 87 Octane. However, you'll have to take out a bunch of timing to make it work, probably on the order of 3deg per 50hp shot.

------------------
George

1995 Impala SS "Cherry Bomb"

My Super Impala SS Website
Cadwiz Website

 

[Guest]

if you can't afford $3 gallon fuel, you can't afford $2-3 per LBS for nitrous, you can't afford the ignition upgrades or the fuel system upgrades and you sure can afford a mishap and a trip on a flatbed.


Nitrous Works part #tnw13045 87-95TBI $509
right out of the summit catalog.

 

[Guest]

whats a good place to buy only NO2 bottles from?

 

[Guest]

www.nitrouswarehouse.com