Chevy Impala SS Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
797 Posts
Discussion Starter · #1 ·
I have 4 spare caprice doors that have power windows. Would i be able to take the regulators off those doors and install them onto my non power doors or should i switch the whole door out? Thanks.
 

· Registered
Joined
·
797 Posts
Discussion Starter · #3 ·
If i cant find a donor car at the junk yard for the harness i was thinking of usung this wiring kit from a1electric.com
 

· Registered
Joined
·
797 Posts
Discussion Starter · #5 ·
Do i need the whole scissor assembly and glass or just the motor? The doors are the same color white but i figured if i start messing with the doors then things start getting out of alignment.
 

· Registered
Joined
·
797 Posts
Discussion Starter · #7 ·
PM sent
 

· Registered
Joined
·
797 Posts
Discussion Starter · #9 ·
Well i got the rear motor assembly out of the donor doors today, went pretty easy. Would anyone be interested in a write up about how to remove and install these before i pull the front motors out? I also found the switches are still on the harness but i think im going to use a different style switch.
 

· Registered
Joined
·
797 Posts
Discussion Starter · #13 ·
No i havent put the motors in yet, i know JohnHPC ended up swaping his door and he said it was a pita. I still need to get the wiring harness and front motors out of the donor doors
 

· Registered
Joined
·
797 Posts
Discussion Starter · #15 ·
No i wasnt swapping doors just swapping internals
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top