Chevy Impala SS Forum banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #3 ·
Those bars look very similar to the HA/HO bars and they are the thickest/stiffest bars available for a B-body. If your suspension is otherwise stock, the bars should perform as advertised. However if you have changed springs,and/or shocks and upgraded your posi to one that will put power to both rear wheels,a rear bar that stiff may put the car into oversteer. I'd suggest that you look at the total package of suspension mods you anticipate and pick the sway bars accordingly.

[ 03-20-2007, 09:37 AM: Message edited by: AllenIDOXLR8 ]
 
G

·
Discussion Starter · #4 ·
Hmm. well I have monroe SS in the front and bilstein sports in the back. 9C1 rear springs and stock front springs. Everything else is pretty standard. Havent done anything with the posi.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top