Chevy Impala SS Forum banner

1 - 20 of 88 Posts

·
Registered
Joined
·
315 Posts
Discussion Starter #1
I've had a lot of requests the past few days for an XMAS sale, so I talked with Keith this morning and we are good to go now thru Jan 8th for a sale. It will be the same as our last sale with programming being $100 plus shipping which is $75 off our normal price of $175.
Thanks,
Bryan

We don't have a pricing button for the sale price on the website, but we can do credit card by phone or paypal to [email protected], or you can send a check or money order with your PCM. We do have some cores available as well.
 

·
Registered
Joined
·
320 Posts
I'm definitely in. Just trying to figure out whether I want to ship my PCM or have PCMforless ship me one of theirs.
 

·
Registered
Joined
·
3,841 Posts
Still have to get mine out to you Brian.....Its just sucks, that even when you have a day off, its really not a day off and you cant do things that you need to do.
 

·
Registered
Joined
·
3,841 Posts
Brian i actually just sent my payment. I will be sending out the pcm today to you. Please pm me if you need any more info about the car for programming.
 

·
Registered
Joined
·
320 Posts
pm sent
 

·
Registered
Joined
·
3,841 Posts
Hey bryan, will you be recieving things after christmas? I seen your site saying your gonna be closed. Just dont want my pcm to be sitting at your business door for a week lol.
 

·
Premium Member
1996 Caprice 9c1, 2018 Ram Laramie CC 4x4 EcoDiesel , '03 Ram 3500 Laramie Sport QC 4x4 Cummins
Joined
·
635 Posts
computer sent today,Thursday 31,2009.
Happy New Year

Forgot to enclose check. Do you do Visa or Paypal?
 

·
Registered
Joined
·
1,793 Posts
This is a great deal

I'm a past customer, with a non daily driver premium fuel tune, have run down the dragstrip with Bryan driving in the next lane, and sent a PCM for another car in for this deal, FAST turnaround, great results, from the SOP meter, that's 'seat of the pants' in a daily driver with regular fuel tune this time.
 

·
Registered
Joined
·
315 Posts
Discussion Starter #12
computer sent today,Thursday 31,2009.
Happy New Year

Forgot to enclose check. Do you do Visa or Paypal?
Yes, we can do paypal or Visa/MC by phone

Thanks,
Bryan
 

·
Registered
Joined
·
315 Posts
Discussion Starter #13
I'm a past customer, with a non daily driver premium fuel tune, have run down the dragstrip with Bryan driving in the next lane, and sent a PCM for another car in for this deal, FAST turnaround, great results, from the SOP meter, that's 'seat of the pants' in a daily driver with regular fuel tune this time.
That was fun running the wagons against each other. Too bad all the dirt on mine was slowing it down compared to that ultra clean beautiful wagon of yours :)
 

·
Registered
Joined
·
275 Posts
What is your amount for me to paypal you if I would like you to send one of your PCM and i send mines in for the core.? If you can send me informtion like amount then I can paypal you the information including what needed on the change.
 

·
Registered
Joined
·
315 Posts
Discussion Starter #15
What is your amount for me to paypal you if I would like you to send one of your PCM and i send mines in for the core.? If you can send me informtion like amount then I can paypal you the information including what needed on the change.
Programming is $100 plus $15 shipping and then the refundable core charge is $125 so it would be $240 and then you get a core charge return when you send yours back.
Our paypal ID is [email protected] and there is an ordersheet on our website that you can fill out with all your info.
Thanks,
Bryan
 

·
Registered
Joined
·
196 Posts
I just paypalled & filled out order sheet, and i have a few questions. I had vats turned off, but previously i bypassed with a resistor in the wires on the column should i remove resistor or leave it? Also when installing should i just unhook the battery unplug old pcm plug in new & hook up tach wire (for z28 cluster) and hook battery back up? thanx
 

·
Registered
Joined
·
315 Posts
Discussion Starter #17
I just paypalled & filled out order sheet, and i have a few questions. I had vats turned off, but previously i bypassed with a resistor in the wires on the column should i remove resistor or leave it? Also when installing should i just unhook the battery unplug old pcm plug in new & hook up tach wire (for z28 cluster) and hook battery back up? thanx
You can leave the resistor in place. Just unhook the battery, unplug the old PCM, plug in the new one and plug the battery back in and you are ready to go.
 

·
Premium Member
1996 Caprice 9c1, 2018 Ram Laramie CC 4x4 EcoDiesel , '03 Ram 3500 Laramie Sport QC 4x4 Cummins
Joined
·
635 Posts
Any update when my pcm will be finished? That is if its even arrived yet.
 

·
Registered
Joined
·
196 Posts
New pcm in car & old one in the mail now for the test drive.
 
1 - 20 of 88 Posts
Top