Chevy Impala SS Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
697 Posts
I have the Amsoil filter finally!

Well here is an update for the RAISS CIA filter replacement. Amsoil Nano Fiber filter. Part # EAAU3560. I ordered it on Wednesday and received it on Friday. Gotta say pretty impressive. Here are some pics of it:

RAISS FILTER on the left, AMSOIL FILTER to the right


Top View


The openings to the F-Body MAF 3.5:


And another side by side comparison:


The blue color looks to me very cool. I have not installed it yet
on the RAISS, but I will do that tomorrow with pics. Same exact size and width as the original RAISS filter.
Thanks Buffman with the hookup!;)
 

·
Registered
Joined
·
697 Posts
Installed the Amsoil Filter today and it fits like a glove.

Old RAISS Filter on the car:





Here are the pics of the Amsoil Filter on the car:





I also gave the car an oil change. Started the car up and it
sounds mean. I also recorded the mileage to see how long this
filter will last. So far it looks like a very good deal!
 

·
Registered
Joined
·
697 Posts
This is the Pre Filter for the Amsoil Filter EaAU3560.
The part number for this Pre Filter is PF 11.

Before the install:



When I installed it on the filter it really is a tight fit to put on.
But it will not come off. Here is a pic before it went back on the MAF:


And now installed:







I went to Island Dragway to race with the ECIRS peeps.
I ran the car for a total of 4 rounds of racing. Opened
up the hood and you can see dirt/dust on top of the pre filter.
That tells me it is doing its job. I just used a rag to take
the dirt/dust off and it looks like new again.

About performance this is what Amsoil website says about it:

Will Not Block Air Flow
AMSOIL Ea Pre-Filters will not cause any significant reduction in air flow. In fact,
AMSOIL EaAU and EaAR Filters allow more air flow than the engine can process, so adding an EaPF will not prevent a more-than-adequate amount of air flow from entering the engine.

I ran a 12.42 @ 109.8MPH with it on:D.
 

·
Registered
Joined
·
697 Posts
I have a RASSI, an need to replace my fliter too, I have the F body MAF, can some post the part number for the right fliter I need to order thanks
I stated previously on this thread that the filter that I purchased is for a F-Body Maf.

The part # is on this thread. I could not find the part number for the original filter of the RAISSE. This is the reason why I went this route.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top