Chevy Impala SS Forum banner
1 - 1 of 13 Posts

· Registered
6,578 Posts
11 year old thread ...but t answer your ?

No need to pull FI fuse. Just push the Schrader valve on back of fuel rail, covered with rag, to release fuel pressure. Install new injectors, start engine. It will take some crank time for the engine to fire as fuel pressure builds back up. Just turn key to "on" position until fuel pump stops priming, just a few seconds, then turn key to start
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.