Chevy Impala SS Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
2,099 Posts
There are two fuseable links. One powers the headlights and horn and the other the ABS module.

From memory they should be attached to the brass post. Did you forget to bolt them on?

Worst case you attached them but for some reason both blew. If they did the wire cover should look melted for the first couple of inches.
 

·
Registered
Joined
·
2,099 Posts
It is one with a lot of aftermarket added on. Just had a little computer melt down.

New picture. Note image has been reversed.

It seems to show the two fuseable links on the #6 bolt.
Hood Circuit component Finger Hardware programmer Motor vehicle
 

·
Registered
Joined
·
2,099 Posts
Not a easy area to work in.

The brass post nut can be a problem, too tight and it can have striped threads, too loose and you have electrical problems. I check the nut every once in a while to make sure it is tight.

Glad it was a easy fix.
 
1 - 7 of 7 Posts
Top