[Guest]

Well as soon as gather up enough money I plan to start spraying. From all the research I've read I think I'll go w/ the NX wet kit. I'll also get the window switch. This will go into my soon LT1 9C1. When I >hopefully< get the nitrous, I'll have exhuast, intake, s10 convertor, fuel pump, and pcm re-pro. Anything Else I'll need to spray the 125 shot or 100 shot? I'm not sure exactly what ignition thingy to get if anyone can point it out it'll be a big help. Also since I don't have posi, can I just buy 1 BF good rich DR?

P.S. Screw the rest of the bolt ons, all I want is a 13 sec car, so it'll match the look of car.

 

[Guest]

One more thing, how hard is it to install the NX wet kit, and does anyone have pics of theres?

 

[Guest]

The best info is right here in the forum. Go to the list all posts in this section and read SMOKKEM's nitrous for newbies thread. It'll tell you everything you need. Basically in addition to the kit (buy the GenX 2 kit to get IMO) to run a window switch you'll need an ignition box like the MSD 6AL. You need to run colder copper plugs (no platinum) with a smaller gap about .035 to .039 max. The install is not hard, just take time to plan where you want to put everything.
Good luck, you'll love it.

 

[Guest]

hey Nory,

Try this post: http://www.impalassforum.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=17&t=000002

 

[Guest]

hey George,,,why don't we put that in the tech tips??would you mind?

 

[Guest]

Hey Prossound, you're the boss

No problem, go right ahead. By the way, I didn't even know we had a tech tip section!! Where is it?????