Chevy Impala SS Forum banner

Spring options for a Fleetwood

12324 Views 28 Replies 18 Participants Last post by  The Stickman
Ok so I looooove cushy feel of floating down the road, but man, my wagon feels like a porsche in the corners compared to the FW......

I do have a set of 9C1 springs about, but somewhere in my distant past I heard of folks putting SS springs in too.

Would the SS springs drop the ride height? If so, assuming I'd need different shocks too. Any other considerations?

I see a set of used ones in the FS section and am considering.....
1 - 1 of 29 Posts
I just installed some used front 9c1 springs with 3/4 coil cut off with ACDelco 45H3011 variable rate rear springs. I like the ride and look. Car has a slight rake with Impala SS wheel and stock size tires
Bilistein shocks and air bags inside the rear spring if I ever need to air them up for heavy loads. All with a eaton Posi 373 Caprice disc brake rear end.
Ill take some pics when I get the car back on the road.
1 - 1 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.