[thebigbadWOLF]

i think when i took the car to be washed, the guy used something that may have dmged the clear coat on my stocks.

it looks kinda like mist or fog, it does not look like it used too..

i would like to get them looking new again, how would i go about doing this?

 

[Bad Bowtie]

Old School!!!!!!

Wheel Polish & Elbow Grease!!!!!!!!!

I Used To Use Luster Pad !!!!! Easy To Use & GOOD STUFF!!!!!

Clear Coat Safe!!!!!!


http://www.lusterlace.com/auto.html


THE BADDER BOWTIE

 

[thebigbadWOLF]

Wheel Polish & Elbow Grease!!!!!!!!!

I Used To Use Luster Pad !!!!! Easy To Use & GOOD STUFF!!!!!

Clear Coat Safe!!!!!!


http://www.lusterlace.com/auto.html


THE BADDER BOWTIE

thanks i will try this

 

[CRSSDCM]

Yep.....watch these car wash clowns with their dirty rags and acidic wheel cleaners.

Me.....I would be getting all new stockers "courtesy of the car wash owner."

Remember, nothing on the stockers but soap and water and wax, its paint....just like the car.

 

[thebigbadWOLF]

Yep.....watch these car wash clowns with their dirty rags and acidic wheel cleaners.

Me.....I would be getting all new stockers "courtesy of the car wash owner."

Remember, nothing on the stockers but soap and water and wax, its paint....just like the car.

normally i wash my own car so i cant be 100% sure they did it, but i just noticed it not to long ago....

i used to use awsome. i think he used simple green on my rims but i am not sure.

 

[Firewood]

Sounds like they burned your clear coat. Lusterpad will not help with that, IMHO.

If the clear coat is burned, you'll need to strip the wheels. There's about a million threads on that.

 

[thebigbadWOLF]

Sounds like they burned your clear coat. Lusterpad will not help with that, IMHO.

If the clear coat is burned, you'll need to strip the wheels. There's about a million threads on that.

there was right because of the crash?

if there is an active one please link me.

 

[Firewood]

here's one:
http://www.impalassforum.com/vBulletin/showthread.php?t=232689
I'll edit in some more.
And this one is sticky worthy
http://www.impalassforum.com/vBulletin/showthread.php?t=229417&highlight=clear+coat

 

[cobrienss]

I had the same problem on mine. Every year I have to clay bar and use a large amount of polish on them. For the rims, I used turtle wax synthetic and it works well for me.

 

[Firewood]

Found another one with tons of pics.
http://gmlongroof.4umer.com/technical-info-f10/how-to-polish-aluminum-wheels-t421.htm