[Monstamac]

My end link bushings are gone and getting tired of the "clunk" when I hit a bump. Any tips for easy removal or techniques that will get this job done with as little pain as possible. I am also wanting to replace the sway bar bushings while I'm at it. Thanks for any help.

 

[94goldprice]

Ii usually do one side at a time with a jack to keep it from springing back and making it easier to re-assemble it all.

 

[96WhiteCloud]

If you're buying new end links and not just the bushings, the easiest way to get the old ones off is a sawzall right through the middle.

 

[B-Body Builder]

And for those Sway bar bushing mount bolts when you take the bolts out.........

http://www.impalassforum.com/vBulletin/showthread.php?t=229339&highlight=Sway+bar

 

[usedtobeafordguy]

the easiest way to get the old ones off is a sawzall right through the middle.

+1 Mine were so rusted that I wasn't able to loosen the top nut before the link just snapped in half. Both sides were like this if I recall correctly.